It's either uart10, or blsp2_uart4, not blsp2_uart10, as there aren't 10
UARTs on BLSP2. Fix the naming to align with what's done in arm64/qcom.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
.../boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 6 +++---
arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 10 +++++-----
.../dts/qcom-msm8974-sony-xperia-shinano-castor.dts | 2 +-
arch/arm/boot/dts/qcom-msm8974.dtsi | 6 +++---
4 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 069136170198..7bd577e8e941 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -12,7 +12,7 @@ / {
aliases {
serial0 = &blsp1_uart1;
- serial1 = &blsp2_uart10;
+ serial1 = &blsp2_uart4;
};
chosen {
@@ -374,7 +374,7 @@ shutdown {
};
};
- blsp2_uart10_pin_a: blsp2-uart10-pin-active {
+ blsp2_uart4_pin_a: blsp2-uart4-pin-active {
tx {
pins = "gpio53";
function = "blsp_uart10";
@@ -473,7 +473,7 @@ serial@f9960000 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&blsp2_uart10_pin_a>;
+ pinctrl-0 = <&blsp2_uart4_pin_a>;
bluetooth {
compatible = "brcm,bcm43438-bt";
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index 96e1c978b878..e4a01a631403 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -326,13 +326,13 @@ serial@f991e000 {
status = "okay";
};
- /* blsp2_uart8 */
+ /* blsp2_uart2 */
serial@f995e000 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart8_pins_active>;
- pinctrl-1 = <&blsp2_uart8_pins_sleep>;
+ pinctrl-0 = <&blsp2_uart2_pins_active>;
+ pinctrl-1 = <&blsp2_uart2_pins_sleep>;
bluetooth {
compatible = "brcm,bcm43540-bt";
@@ -380,14 +380,14 @@ volume-up {
};
pinctrl@fd510000 {
- blsp2_uart8_pins_active: blsp2-uart8-pins-active {
+ blsp2_uart2_pins_active: blsp2-uart2-pins-active {
pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "blsp_uart8";
drive-strength = <8>;
bias-disable;
};
- blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep {
+ blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "gpio";
drive-strength = <2>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-shinano-castor.dts
index e66937e3f7dd..d0d03ef12c31 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-shinano-castor.dts
@@ -11,7 +11,7 @@ / {
aliases {
serial0 = &blsp1_uart2;
- serial1 = &blsp2_uart7;
+ serial1 = &blsp2_uart1;
};
chosen {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index e216630a1d02..e102b72558f1 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -713,7 +713,7 @@ blsp1_uart2: serial@f991e000 {
status = "disabled";
};
- blsp2_uart7: serial@f995d000 {
+ blsp2_uart1: serial@f995d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995d000 0x1000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
@@ -722,7 +722,7 @@ blsp2_uart7: serial@f995d000 {
status = "disabled";
};
- blsp2_uart8: serial@f995e000 {
+ blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -731,7 +731,7 @@ blsp2_uart8: serial@f995e000 {
status = "disabled";
};
- blsp2_uart10: serial@f9960000 {
+ blsp2_uart4: serial@f9960000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf9960000 0x1000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
--
2.35.2
