Use &labels to align with the style used in new DTS and apply tiny
style fixes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
.../boot/dts/qcom-msm8974-fairphone-fp2.dts | 579 +++++++++---------
arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +-
2 files changed, 277 insertions(+), 304 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index c502a059f090..f8a78bcc9a02 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -5,7 +5,6 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
/ {
model = "Fairphone 2";
compatible = "fairphone,fp2", "qcom,msm8974";
@@ -54,356 +53,330 @@ vibrator {
enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
vcc-supply = <&pm8941_l18>;
};
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&imem {
+ status = "okay";
+
+ reboot-mode {
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
+ };
+};
+
+&otg {
+ status = "okay";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
- smd {
- rpm {
- rpm_requests {
- pm8841-regulators {
- s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s3 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
- pm8941-regulators {
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
-
- regulator-boot-on;
- };
-
- s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l3 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l11 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1350000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l19 {
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <3350000>;
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- regulator-system-load = <200000>;
- regulator-allow-set-load;
- };
-
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
-
- regulator-boot-on;
- };
- };
- };
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "okay";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
};
-&soc {
- serial@f991e000 {
- status = "okay";
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio1", "gpio2", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
};
+};
- remoteproc@fb21b000 {
- status = "okay";
+&pronto {
+ status = "okay";
- vddmx-supply = <&pm8841_s1>;
- vddcx-supply = <&pm8841_s2>;
+ vddmx-supply = <&pm8841_s1>;
+ vddcx-supply = <&pm8841_s2>;
- pinctrl-names = "default";
- pinctrl-0 = <&wcnss_pin_a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
- smd-edge {
- qcom,remote-pid = <4>;
- label = "pronto";
+ smd-edge {
+ qcom,remote-pid = <4>;
+ label = "pronto";
- wcnss {
- status = "okay";
- };
+ wcnss {
+ status = "okay";
};
};
+};
+
+&rpm_requests {
+ pm8841-regulators {
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
- pinctrl@fd510000 {
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
};
+ };
- sdhc2_pin_a: sdhc2-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <10>;
- bias-disable;
- };
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
};
- wcnss_pin_a: wcnss-pin-active {
- wlan {
- pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
- function = "wlan";
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- drive-strength = <6>;
- bias-pull-down;
- };
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- bt {
- pins = "gpio35", "gpio43", "gpio44";
- function = "bt";
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
- drive-strength = <2>;
- bias-pull-down;
- };
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
- fm {
- pins = "gpio41", "gpio42";
- function = "fm";
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
- drive-strength = <2>;
- bias-pull-down;
- };
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- };
- sdhci@f9824900 {
- status = "okay";
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
- bus-width = <8>;
- non-removable;
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
- };
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
- sdhci@f98a4900 {
- status = "okay";
+ pm8941_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1350000>;
+ };
- bus-width = <4>;
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>;
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-boot-on;
+ };
};
+};
- usb@f9a55000 {
- status = "okay";
+&sdhc_1 {
+ status = "okay";
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
- hnp-disable;
- srp-disable;
- adp-disable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+};
+
+&sdhc_2 {
+ status = "okay";
- ulpi {
- phy@a {
- status = "okay";
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a>;
+};
+
+&tlmm {
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
};
};
- imem@fe805000 {
- status = "okay";
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
- reboot-mode {
- mode-normal = <0x77665501>;
- mode-bootloader = <0x77665500>;
- mode-recovery = <0x77665502>;
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
};
};
-};
-&spmi_bus {
- pm8941@0 {
- gpios@c000 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio1", "gpio2", "gpio5";
- function = "normal";
+ wcnss_pin_a: wcnss-pin-active {
+ wlan {
+ pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+ function = "wlan";
+
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ bt {
+ pins = "gpio35", "gpio43", "gpio44";
+ function = "bt";
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ fm {
+ pins = "gpio41", "gpio42";
+ function = "fm";
+
+ drive-strength = <2>;
+ bias-pull-down;
};
};
-};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index b55ee84bd445..6071f5eeba74 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1590,7 +1590,7 @@ dsi0_phy: dsi-phy@fd922a00 {
};
};
- imem@fe805000 {
+ imem: imem@fe805000 {
status = "disabled";
compatible = "syscon", "simple-mfd";
reg = <0xfe805000 0x1000>;
--
2.35.2
