TI AM437x SoCs support isolation of the IOs so that control is taken from the peripheral they are connected to and overridden by values present in the control register for that pad. This series documents a new property 'ti,set-io-isolation' and updates the wkup_m3_ipc driver to inform the CM3 firmware when that property is set. A prerequisite for this series is: [PATCH v2 0/2] soc: ti: wkup_m3_ipc: support vtt toggle https://lore.kernel.org/lkml/20220409211215.2529387-1-dfustini@xxxxxxxxxxxx/T/ Changes from v2: - correct indentation of the 'allOf:' block in binding patch Changes from v1: - correct typo of 'ti,set-io-isolation' property - make 'ti,set-io-isolation' only valid for 'ti,am4372-wkup-m3-ipc' Dave Gerlach (1): soc: ti: wkup_m3_ipc: Add support for IO Isolation Drew Fustini (1): dt-bindings: wkup-m3-ipc: Add ti,set-io-isolation property .../bindings/soc/ti/wkup-m3-ipc.yaml | 78 +++++++++++++++++-- drivers/soc/ti/wkup_m3_ipc.c | 14 +++- include/linux/wkup_m3_ipc.h | 1 + 3 files changed, 86 insertions(+), 7 deletions(-) -- 2.32.0
