Re: [PATCH v7 1/4] drm/msm/dp: Add eDP support via aux_bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/04/2022 19:39, Doug Anderson wrote:
Hi,

On Thu, Apr 14, 2022 at 5:20 AM Sankeerth Billakanti
<quic_sbillaka@xxxxxxxxxxx> wrote:

@@ -1530,6 +1532,60 @@ void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor)
         }
  }

+static int dp_display_get_next_bridge(struct msm_dp *dp)
+{
+       int rc;
+       struct dp_display_private *dp_priv;
+       struct device_node *aux_bus;
+       struct device *dev;
+
+       dp_priv = container_of(dp, struct dp_display_private, dp_display);
+       dev = &dp_priv->pdev->dev;
+       aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
+
+       if (aux_bus && dp->is_edp) {
+               dp_display_host_init(dp_priv);
+               dp_catalog_ctrl_hpd_config(dp_priv->catalog);
+               dp_display_host_phy_init(dp_priv);
+               enable_irq(dp_priv->irq);
+
+               rc = devm_of_dp_aux_populate_ep_devices(dp_priv->aux);
+               of_node_put(aux_bus);
+               if (rc) {
+                       disable_irq(dp_priv->irq);
+                       dp_display_host_phy_exit(dp_priv);
+                       dp_display_host_deinit(dp_priv);
+                       return rc;
+               }
+       } else if (dp->is_edp) {
+               DRM_ERROR("eDP aux_bus not found\n");
+               return -ENODEV;
+       }
+
+       /*
+        * External bridges are mandatory for eDP interfaces: one has to
+        * provide at least an eDP panel (which gets wrapped into panel-bridge).
+        *
+        * For DisplayPort interfaces external bridges are optional, so
+        * silently ignore an error if one is not present (-ENODEV).
+        */
+       rc = dp_parser_find_next_bridge(dp_priv->parser);

This gets into the same problem that Dmitry pointed out that ps8640
has that's addressed by my recent series [1].  Namely it's not
guaranteed that the panel will have finished probing by the time
devm_of_dp_aux_populate_ep_devices() finishes probing. I don't think
it's going to be really solvable without the bigger rewrite that we've
been discussing, though. ...it's probably OK to land something like
what you have here, but it might at least deserve a comment in the
code?

[1] https://lore.kernel.org/r/20220409023628.2104952-1-dianders@xxxxxxxxxxxx

We agreed that rework would follow up in a timely manner if these patches are applied. However a comment would be still a good thing.



+       if (rc == -ENODEV) {
+               if (dp->is_edp) {
+                       DRM_ERROR("eDP: next bridge is not present\n");
+                       return rc;
+               }
+       } else if (rc) {
+               if (rc != -EPROBE_DEFER)
+                       DRM_ERROR("DP: error parsing next bridge: %d\n", rc);
+               return rc;

In both of your two error returns here isn't it a problem that you don't do:

   disable_irq(dp_priv->irq);
   dp_display_host_phy_exit(dp_priv);
   dp_display_host_deinit(dp_priv);

Should probably at least fix that clear error before landing, unless
I'm misunderstanding and there's some reason not to do that?


As discussed previously, I'm not convinced that we've covered every
corner case for properly doing and undoing the above things. I'm
hoping that once we do the cleanup and move to pm_runtime() management
that it will be cleaned up?


@@ -114,10 +114,12 @@ struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *
         bridge->funcs = &dp_bridge_ops;
         bridge->type = dp_display->connector_type;

-       bridge->ops =
-               DRM_BRIDGE_OP_DETECT |
-               DRM_BRIDGE_OP_HPD |
-               DRM_BRIDGE_OP_MODES;
+       if (!dp_display->is_edp) {
+               bridge->ops =
+                       DRM_BRIDGE_OP_DETECT |
+                       DRM_BRIDGE_OP_HPD |
+                       DRM_BRIDGE_OP_MODES;

Given that Dmitry had questions about why eDP has different ops in his
previous review of this code, the above probably deserves an inline
code comment. If you want to use my wording, you could paste this into
your code:

   /*
    * Many ops only make sense for DP. Why?
    * - Detect/HPD are used by DRM to know if a display is _physically_
    *   there, not whether the display is powered on / finished initting.
    *   On eDP we assume the display is always there because you can't
    *   know until power is applied. If we don't implement the ops DRM will
    *   assume our display is always there.
    * - Currently eDP mode reading is driven by the panel driver. This
    *   allows the panel driver to properly power itself on to read the
    *   modes.
    */

I think it's too verbose and a bit incorrect.
This is a bit saner:
/*
 * These ops do not make sense for eDP, since they are provided
 * by the panel-bridge corresponding to the attached eDP panel.
 */

My question was whether we really need to disable them for eDP since for eDP the detect and and get_modes will be overridden anyway.

Overall: as discussed, I think that the current implementation is a
bit fragile and might have some wrong corner cases since it's hard for
me to reason about exactly when we init/de-init things. Even if it
works great, the fact that it's hard to reason about isn't wonderful.
That being said, I honestly believe that would benefit upstream to get
this landed and iterate on it. I don't think this should be causing
any existing behavior to be _worse_ and getting it landed upstream
will keep more people focused on the same codebase.


-Doug


--
With best wishes
Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux