[PATCH V10 3/9] dt-bindings: mfd: pm8008: Add regulators

[Satya Priya <quic_c_skakit@xxxxxxxxxxx>]

Add regulators for pm8008 with example.

Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V10:
 - Add regulators under main mfd node as in DT.

 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index 3312784..060cc35 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -44,6 +44,9 @@ properties:
   "#size-cells":
     const: 0
 
+  regulators:
+    $ref: "/schemas/regulator/qcom,pm8008-regulators.yaml#"
+
   reset-gpios:
     maxItems: 1
 
@@ -129,6 +132,20 @@ examples:
           interrupt-controller;
           #interrupt-cells = <2>;
         };
+
+        regulators {
+          vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+          vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+          vdd_l5-supply = <&vreg_bob>;
+          vdd_l6-supply = <&vreg_bob>;
+          vdd_l7-supply = <&vreg_bob>;
+
+          ldo1 {
+            regulator-name = "pm8008_l1";
+            regulator-min-microvolt = <950000>;
+            regulator-max-microvolt = <1300000>;
+          };
+        };
       };
     };
 
-- 
2.7.4