[PATCH] dt-bindings: Fix array constraints on scalar properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Scalar properties shouldn't have array constraints (minItems, maxItems,
items). These constraints can simply be dropped with any constraints under
'items' moved up a level.

Cc: Agathe Porte <agathe.porte@xxxxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Jean Delvare <jdelvare@xxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
Cc: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Cc: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: linux-hwmon@xxxxxxxxxxxxxxx
Cc: alsa-devel@xxxxxxxxxxxxxxxx
Cc: linux-iio@xxxxxxxxxxxxxxx
Cc: linux-media@xxxxxxxxxxxxxxx
Cc: linux-remoteproc@xxxxxxxxxxxxxxx
Cc: linux-spi@xxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml       | 5 ++---
 .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml      | 4 +---
 Documentation/devicetree/bindings/media/coda.yaml            | 1 -
 .../devicetree/bindings/media/mediatek,vcodec-decoder.yaml   | 2 --
 .../devicetree/bindings/media/mediatek,vcodec-encoder.yaml   | 2 --
 .../bindings/media/mediatek,vcodec-subdev-decoder.yaml       | 1 -
 .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 4 +---
 Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml  | 2 --
 8 files changed, 4 insertions(+), 17 deletions(-)

diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
index 801ca9ba7d34..e7493e25a7d2 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
@@ -58,9 +58,8 @@ patternProperties:
           The value (two's complement) to be programmed in the channel specific N correction register.
           For remote channels only.
         $ref: /schemas/types.yaml#/definitions/int32
-        items:
-          minimum: -128
-          maximum: 127
+        minimum: -128
+        maximum: 127
 
     required:
       - reg
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 7c260f209687..952bc900d0fa 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -108,9 +108,7 @@ patternProperties:
           - [1-5]: order 1 to 5.
           For audio purpose it is recommended to use order 3 to 5.
         $ref: /schemas/types.yaml#/definitions/uint32
-        items:
-          minimum: 0
-          maximum: 5
+        maximum: 5
 
       "#io-channel-cells":
         const: 1
diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
index 36781ee4617f..c9d5adbc8c4a 100644
--- a/Documentation/devicetree/bindings/media/coda.yaml
+++ b/Documentation/devicetree/bindings/media/coda.yaml
@@ -65,7 +65,6 @@ properties:
   iram:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle pointing to the SRAM device node
-    maxItems: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
index 9b179bb44dfb..aa55ca65d6ed 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -63,13 +63,11 @@ properties:
 
   mediatek,vpu:
     $ref: /schemas/types.yaml#/definitions/phandle
-    maxItems: 1
     description:
       Describes point to vpu.
 
   mediatek,scp:
     $ref: /schemas/types.yaml#/definitions/phandle
-    maxItems: 1
     description:
       Describes point to scp.
 
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
index e7b65a91c92c..2746dea3ce79 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -55,13 +55,11 @@ properties:
 
   mediatek,vpu:
     $ref: /schemas/types.yaml#/definitions/phandle
-    maxItems: 1
     description:
       Describes point to vpu.
 
   mediatek,scp:
     $ref: /schemas/types.yaml#/definitions/phandle
-    maxItems: 1
     description:
       Describes point to scp.
 
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
index 7687be0f50aa..c73bf2352aca 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -61,7 +61,6 @@ properties:
 
   mediatek,scp:
     $ref: /schemas/types.yaml#/definitions/phandle
-    maxItems: 1
     description: |
       The node of system control processor (SCP), using
       the remoteproc & rpmsg framework.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index 2424de733ee4..d99a729d2710 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -104,8 +104,7 @@ properties:
   qcom,smem-state-names:
     $ref: /schemas/types.yaml#/definitions/string
     description: The names of the state bits used for SMP2P output
-    items:
-      - const: stop
+    const: stop
 
   glink-edge:
     type: object
@@ -130,7 +129,6 @@ properties:
       qcom,remote-pid:
         $ref: /schemas/types.yaml#/definitions/uint32
         description: ID of the shared memory used by GLINK for communication with WPSS
-        maxItems: 1
 
     required:
       - interrupts
diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
index b104899205f6..5de710adfa63 100644
--- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -124,7 +124,6 @@ properties:
     description: |
       Override the default TX fifo size.  Unit is words.  Ignored if 0.
     $ref: /schemas/types.yaml#/definitions/uint32
-    maxItems: 1
     default: 64
 
   renesas,rx-fifo-size:
@@ -132,7 +131,6 @@ properties:
     description: |
       Override the default RX fifo size.  Unit is words.  Ignored if 0.
     $ref: /schemas/types.yaml#/definitions/uint32
-    maxItems: 1
     default: 64
 
 required:
-- 
2.32.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux