From: Phil Elwell <phil@xxxxxxxxxxxxxxx>
The GPIOs 30 to 39 are connected to the Cypress CYW43438 (Wifi/BT).
So fix the GPIO line names accordingly.
Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Phil Elwell <phil@xxxxxxxxxxxxxxx>
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
---
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 243236bc1e00..8b043ab62dc8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -74,16 +74,18 @@ &gpio {
"GPIO27",
"SDA0",
"SCL0",
- "NC", /* GPIO30 */
- "NC", /* GPIO31 */
- "NC", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
- "NC", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
- "NC", /* GPIO38 */
- "NC", /* GPIO39 */
+ /* Used by BT module */
+ "CTS0",
+ "RTS0",
+ "TXD0",
+ "RXD0",
+ /* Used by Wifi */
+ "SD1_CLK",
+ "SD1_CMD",
+ "SD1_DATA0",
+ "SD1_DATA1",
+ "SD1_DATA2",
+ "SD1_DATA3",
"CAM_GPIO1", /* GPIO40 */
"WL_ON", /* GPIO41 */
"NC", /* GPIO42 */
--
2.25.1
