On Thu, 11 Sep 2014 19:42:09 +0200
Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx> wrote:
> On 11/09/2014 at 15:53:08 +0200, Boris Brezillon wrote :
> > The GPBR registers are not part of the RTT block and thus should not be
> > defined in the reg property of the rtt node.
> >
> > Use syscon to provide a proper DT representation and reference the GPBR
> > syscon device in a new "atmel,time-reg" property which store both the
> > syscon device phandle and the register offset within the GPBR block.
> >
> > When using non DT boards, we won't be able to retrieve the syscon regmap,
> > hence we need to create our own regmap using the memory region defined
> > in the 2nd memory resource assigned to the RTT platform device.
> >
> > Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> > ---
> > drivers/rtc/Kconfig | 1 +
> > drivers/rtc/rtc-at91sam9.c | 59 +++++++++++++++++++++++++++++++++++++++-------
> > 2 files changed, 51 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> > index a168e96..7d76da8 100644
> > --- a/drivers/rtc/Kconfig
> > +++ b/drivers/rtc/Kconfig
> > @@ -1081,6 +1081,7 @@ config RTC_DRV_AT91RM9200
> > config RTC_DRV_AT91SAM9
> > tristate "AT91SAM9x/AT91CAP9 RTT as RTC"
> > depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
> > + select MFD_SYSCON
> > help
> > RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
> > (Real Time Timer). These timers are powered by the backup power
> > diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
> > index d72c34d..944e317 100644
> > --- a/drivers/rtc/rtc-at91sam9.c
> > +++ b/drivers/rtc/rtc-at91sam9.c
> > @@ -21,6 +21,8 @@
> > #include <linux/slab.h>
> > #include <linux/platform_data/atmel.h>
> > #include <linux/io.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/regmap.h>
> >
> > /*
> > * This driver uses two configurable hardware resources that live in the
> > @@ -72,7 +74,8 @@ struct sam9_rtc {
> > void __iomem *rtt;
> > struct rtc_device *rtcdev;
> > u32 imr;
> > - void __iomem *gpbr;
> > + struct regmap *gpbr;
> > + unsigned int gpbr_offset;
> > int irq;
> > };
> >
> > @@ -81,10 +84,19 @@ struct sam9_rtc {
> > #define rtt_writel(rtc, field, val) \
> > writel((val), (rtc)->rtt + AT91_RTT_ ## field)
> >
> > -#define gpbr_readl(rtc) \
> > - readl((rtc)->gpbr)
> > -#define gpbr_writel(rtc, val) \
> > - writel((val), (rtc)->gpbr)
> > +static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
> > +{
> > + unsigned int val;
> > +
> > + regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
> > +
> > + return val;
> > +}
> > +
> > +static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
> > +{
> > + regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
> > +}
> >
> > /*
> > * Read current time and date in RTC
> > @@ -301,6 +313,12 @@ static const struct rtc_class_ops at91_rtc_ops = {
> > .alarm_irq_enable = at91_rtc_alarm_irq_enable,
> > };
> >
> > +static struct regmap_config gpbr_regmap_config = {
> > + .reg_bits = 32,
> > + .val_bits = 32,
> > + .reg_stride = 4,
> > +};
> > +
> > /*
> > * Initialize and install RTC driver
> > */
> > @@ -334,10 +352,33 @@ static int at91_rtc_probe(struct platform_device *pdev)
> > if (IS_ERR(rtc->rtt))
> > return PTR_ERR(rtc->rtt);
> >
> > - r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> > - rtc->gpbr = devm_ioremap_resource(&pdev->dev, r);
> > - if (IS_ERR(rtc->gpbr))
> > - return PTR_ERR(rtc->rtt);
> > + if (!pdev->dev.of_node) {
> > + void __iomem *gpbr;
> > +
> > + r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> > + gpbr = devm_ioremap_resource(&pdev->dev, r);
> > + if (IS_ERR(gpbr))
> > + return PTR_ERR(gpbr);
> > +
>
> Maybe you could add a comment here as this is soon to be dead code.
Sure. I'll add a TODO comment.
Thanks.
Boris
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
