The stmpe_platform_data has a irq_over_gpio field, which allows the system to read STMPE events whenever an IRQ occurs on a GPIO pin. This patch adds the ability to configure this field and to use a GPIO as an IRQ source for boards configuring the STMPE in device tree. Signed-off-by: Sean Cross <xobs@xxxxxxxxxx> --- drivers/mfd/stmpe.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 3b6bfa7..4c42b05 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -1122,7 +1122,12 @@ static void stmpe_of_probe(struct stmpe_platform_data *pdata, if (pdata->id < 0) pdata->id = -1; - pdata->irq_trigger = IRQF_TRIGGER_NONE; + pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0, + &pdata->irq_trigger); + if (gpio_is_valid(pdata->irq_gpio)) + pdata->irq_over_gpio = 1; + else + pdata->irq_trigger = IRQF_TRIGGER_NONE; of_property_read_u32(np, "st,autosleep-timeout", &pdata->autosleep_timeout); -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
