This clock is a gate for the TCU hardware block on these SoCs, but
it wasn't included in the device tree since the ingenic-tcu driver
erroneously did not request it.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
arch/mips/boot/dts/ingenic/x1000.dtsi | 5 +++--
arch/mips/boot/dts/ingenic/x1830.dtsi | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 8bd27edef216..c69df8eb158e 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -111,8 +111,9 @@ tcu: timer@10002000 {
clocks = <&cgu X1000_CLK_RTCLK>,
<&cgu X1000_CLK_EXCLK>,
- <&cgu X1000_CLK_PCLK>;
- clock-names = "rtc", "ext", "pclk";
+ <&cgu X1000_CLK_PCLK>,
+ <&cgu X1000_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi
index 2595df8671c7..4408df24ca98 100644
--- a/arch/mips/boot/dts/ingenic/x1830.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1830.dtsi
@@ -104,8 +104,9 @@ tcu: timer@10002000 {
clocks = <&cgu X1830_CLK_RTCLK>,
<&cgu X1830_CLK_EXCLK>,
- <&cgu X1830_CLK_PCLK>;
- clock-names = "rtc", "ext", "pclk";
+ <&cgu X1830_CLK_PCLK>,
+ <&cgu X1830_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
#interrupt-cells = <1>;
--
2.35.1
