On Fri, Apr 08, 2022 at 04:57:22PM +0200, Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> > > > Add DMA properties to uart2 node of the base i.MX 8M Plus device tree, > add toradex,verdin-imx8mp et al. to dt-bindings and finally, add > initial support for Verdin iMX8M Plus. > > Changes in v3: > - Add missing audio codec todo on development board as well. > - Actually define scl/sda-gpios for Verdin I2C_2_DSI aka i2c2. Also > pointed out by Laurent. Thanks! > - Update PMIC LDO4 and I2C level shifter enablement comment. > - Fix USDHC2_VSELECT sleep pinctrl value and add a comment. > - Add comment about lowering frequency on Verdin I2C_2_DSI as suggested > by Laurent. > - Re-based on top of Shawn's latest for-next based on 5.18-rc1. > > Changes in v2: > - Add Laurent's reviewed-by tag. > - Add Krzysztof's reviewed-by tag. > - Fix capitalisation of verdin in comments as reported by Laurent. > - Add/modify todo comments as suggested by Laurent. > - Add Laurent's reviewed- and tested-by tags. > > Marcel Ziswiler (3): > arm64: dts: imx8mp: add uart2 dma > dt-bindings: arm: fsl: add toradex,verdin-imx8mp et al. > arm64: dts: freescale: add initial support for verdin imx8m plus Applied all, thanks!
