On Wed, Mar 30, 2022 at 01:34:42PM +0200, Michael Walle wrote: > At the moment, the dtsi will force the dr_mode to host. This is > problematic because it will always turn on the Vbus voltage regardless > if the port is host or device. This might lead to a "shortcut" between > the two USB endpoints because both might have their Vbus supplies > enabled. Therefore, the default should be "otg" for any ports which > aren't host only (from a SoC point of view) and have a user of the dtsi > file overwrite that explicitly. > > Move the 'dr_mode = "host";' into the board dts. Now that the dtsi > doesn't set the dr_mode anymore, we can also drop the 'dr_mode = "otg";' > in the board dts because that is the default value if dr_mode is not > set. > > Signed-off-by: Michael Walle <michael@xxxxxxxx> Applied, thanks!
