All pin groups function as gpio unless set otherwise. Therefore, remove this unnecessary binding. Tested on UniElec U7621-06-16M on OpenWrt. Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx> --- arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts | 12 ------------ arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 12 ------------ 2 files changed, 24 deletions(-) diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts index 75f3b0425487..c307a0edb91f 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts @@ -97,18 +97,6 @@ &pcie { status = "okay"; }; -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: state-default { - gpio-pinmux { - groups = "uart3", "wdt"; - function = "gpio"; - }; - }; -}; - &gmac1 { status = "okay"; phy-handle = <ðphy4>; diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts index b427ae9e081f..8268d738e74f 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts @@ -81,18 +81,6 @@ &pcie { status = "okay"; }; -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: state-default { - gpio-pinmux { - groups = "wdt"; - function = "gpio"; - }; - }; -}; - &gmac1 { status = "okay"; phy-handle = <ðphy7>; -- 2.25.1