Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@xxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index a1c8ae516d21..b2975be3ae04 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1040,7 +1040,7 @@ sata0: sata@29000000 {
};
/* Temporary fixed regulator */
- sdcc1bam:dma@12402000{
+ sdcc1bam: dma-controller@12402000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1050,7 +1050,7 @@ sdcc1bam:dma@12402000{
qcom,ee = <0>;
};
- sdcc3bam:dma@12182000{
+ sdcc3bam: dma-controller@12182000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -1060,7 +1060,7 @@ sdcc3bam:dma@12182000{
qcom,ee = <0>;
};
- sdcc4bam:dma@121c2000{
+ sdcc4bam: dma-controller@121c2000{
compatible = "qcom,bam-v1.3.0";
reg = <0x121c2000 0x8000>;
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
--
2.25.1
