From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Enable the Combphy and Sata nodes in Bananapi R2 Pro Board.
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 879557595a64..40cf2236c0b6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -119,6 +119,11 @@ &combphy1 {
status = "okay";
};
+&combphy2 {
+ /* used for SATA */
+ status = "okay";
+};
+
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
@@ -484,6 +489,10 @@ &saradc {
status = "okay";
};
+&sata2 {
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
--
2.25.1
