On Tue, Mar 22, 2022 at 11:01:50AM +0800, Medad CChien wrote:
> ECC must be configured in the BootBlock header.
> Then, you can read error counts via
> the EDAC kernel framework.
>
> Signed-off-by: Medad CChien <ctcchien@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> index 3696980a3da1..ba542b26941e 100644
> --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> @@ -106,6 +106,13 @@
> interrupt-parent = <&gic>;
> ranges;
>
> + mc: memory-controller@f0824000 {
> + compatible = "nuvoton,npcm750-memory-controller";
> + reg = <0x0 0xf0824000 0x0 0x1000>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> rstc: rstc@f0801000 {
> compatible = "nuvoton,npcm750-reset";
> reg = <0xf0801000 0x70>;
> --
This needs an ACK from devicetree folks.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
