Convert the device tree bindings for the Lantiq XWAY SoC RCU reset
controller to YAML schema to allow participating in DT validation.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
.../bindings/reset/lantiq,reset.txt | 30 ------------
.../bindings/reset/lantiq,reset.yaml | 49 +++++++++++++++++++
2 files changed, 49 insertions(+), 30 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/reset/lantiq,reset.txt
create mode 100644 Documentation/devicetree/bindings/reset/lantiq,reset.yaml
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.txt b/Documentation/devicetree/bindings/reset/lantiq,reset.txt
deleted file mode 100644
index c6aef36b7d15..000000000000
--- a/Documentation/devicetree/bindings/reset/lantiq,reset.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Lantiq XWAY SoC RCU reset controller binding
-============================================
-
-This binding describes a reset-controller found on the RCU module on Lantiq
-XWAY SoCs.
-
-This node has to be a sub node of the Lantiq RCU block.
-
--------------------------------------------------------------------------------
-Required properties:
-- compatible : Should be one of
- "lantiq,danube-reset"
- "lantiq,xrx200-reset"
-- reg : Defines the following sets of registers in the parent
- syscon device
- - Offset of the reset set register
- - Offset of the reset status register
-- #reset-cells : Specifies the number of cells needed to encode the
- reset line, should be 2.
- The first cell takes the reset set bit and the
- second cell takes the status bit.
-
--------------------------------------------------------------------------------
-Example for the reset-controllers on the xRX200 SoCs:
- reset0: reset-controller@10 {
- compatible = "lantiq,xrx200-reset";
- reg <0x10 0x04>, <0x14 0x04>;
-
- #reset-cells = <2>;
- };
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.yaml b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
new file mode 100644
index 000000000000..15d65a5dd631
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq XWAY SoC RCU reset controller
+
+maintainers:
+ - Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
+
+description: |
+ This binding describes a reset-controller found on the RCU module on Lantiq
+ XWAY SoCs. This node has to be a sub node of the Lantiq RCU block.
+
+properties:
+ compatible:
+ enum:
+ - lantiq,danube-reset
+ - lantiq,xrx200-reset
+
+ reg:
+ description: |
+ Defines the following sets of registers in the parent syscon device
+ Offset of the reset set register
+ Offset of the reset status register
+ maxItems: 2
+
+ '#reset-cells':
+ description: |
+ The first cell takes the reset set bit and the second cell takes the
+ status bit.
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ // On the xRX200 SoCs:
+ reset0: reset-controller@10 {
+ compatible = "lantiq,xrx200-reset";
+ reg = <0x10 0x04>, <0x14 0x04>;
+ #reset-cells = <2>;
+ };
--
2.30.2
