The hisilicon,hi6220-sysctrl, hisilicon,hi6220-mediactrl, and
hisilicon,hi6220-aoctrl controllers are already described in:
Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
.../bindings/reset/hisilicon,hi6220-reset.txt | 37 -------------------
1 file changed, 37 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
deleted file mode 100644
index ea0a6a9734c1..000000000000
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Hisilicon System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-The reset controller registers are part of the system-ctl block on
-hi6220 SoC.
-
-Required properties:
-- compatible: should be one of the following:
- - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller.
- - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller.
- - "hisilicon,hi6220-aoctrl", "syscon" : For ao reset controller.
-- reg: should be register base and length as documented in the
- datasheet
-- #reset-cells: 1, see below
-
-Example:
-sys_ctrl: sys_ctrl@f7030000 {
- compatible = "hisilicon,hi6220-sysctrl", "syscon";
- reg = <0x0 0xf7030000 0x0 0x2000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-example:
-
- uart1: serial@..... {
- ...
- resets = <&sys_ctrl PERIPH_RSTEN3_UART1>;
- ...
- };
-
-The index could be found in <dt-bindings/reset/hisi,hi6220-resets.h>.
--
2.30.2
