RE: [PATCH 0/5] imx: support noc settings with power domain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> Subject: Re: [PATCH 0/5] imx: support noc settings with power domain
> 
> Hi Peng,
> 
> Am Mittwoch, dem 06.04.2022 um 16:23 +0800 schrieb Peng Fan (OSS):
> > From: Peng Fan <peng.fan@xxxxxxx>
> >
> > i.MX8MP has a design that NoC(Not main NoC) is distributed in multiple
> > blocks, such as vpumix, hsiomix and etc. The access to NoC requires
> > power domain on and blk ctrl settings configured.
> >
> > So the design here is for mixes that not have blk-ctrl, configure the
> > NoC in gpcv2 driver, for mixes that have blk-ctrl, configure the NoC
> > in blk-ctrl drivers.
> >
> > This v1 patchset not apply on Shawn's tree, I picked up Lucas's HSIO
> > and Laurent's mediablk patches, then worked out this patchset:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith
> >
> ub.com%2FMrVan%2Flinux%2Ftree%2Fnoc-imx8mp&amp;data=04%7C01%7
> Cpeng.fan
> > %40nxp.com%7C3bd1d020ad8f4a68efc808da17b28ac8%7C686ea1d3bc2b
> 4c6fa92cd9
> >
> 9c5c301635%7C0%7C0%7C637848352908363591%7CUnknown%7CTWFpbG
> Zsb3d8eyJWIj
> >
> oiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3
> 000&am
> >
> p;sdata=ZVeHFy%2FEaWPhAj%2BURGIDXoWYdX5eeQoEIeZYZoxPPNo%3D&a
> mp;reserve
> > d=0
> >
> > Note: This interconnect related functions not added. This patchset is
> > only to replace the function did in NXP downstream:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsour
> >
> ce.codeaurora.org%2Fexternal%2Fimx%2Fimx-atf%2Ftree%2Fplat%2Fimx%2
> Fimx
> >
> 8m%2Fimx8mp%2Fgpc.c%3Fh%3Dlf_v2.4%23n157&amp;data=04%7C01%7C
> peng.fan%4
> >
> 0nxp.com%7C3bd1d020ad8f4a68efc808da17b28ac8%7C686ea1d3bc2b4c6fa
> 92cd99c
> >
> 5c301635%7C0%7C0%7C637848352908363591%7CUnknown%7CTWFpbGZs
> b3d8eyJWIjoi
> >
> MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C30
> 00&amp;
> >
> sdata=eLawc3SJQBRmVwcOA2%2B6u6d2ZaYxqcO4Gm%2FqEJpqxFE%3D&a
> mp;reserved=
> > 0
> 
> As a general comment I think this is implemented the wrong way around.
> 
> Neither GPC, nor the blk-ctrl should poke into the NoC registers directly. The
> NoC driver should attach itself to the power domain via a notifier (same as
> the blk-ctrl does with the GPC domains) and should do the necessary NoC
> configuration when the power domain is powered up.

If separate NoC in a standalone driver, NoC may be configured not as early as
power domain up. Saying lcdif is running, NoC driver probe starts w/o defer
probe.

Thanks,
Peng.


> 
> Regards,
> Lucas
> >
> > Peng Fan (5):
> >   dt-bindings: interconnect: imx8m: Add bindings for imx8mp noc
> >   arm64: dts: imx8mp: add noc node
> >   soc: imx: gpcv2: support i.MX8MP NoC settings
> >   soc: imx: imx8m-blk-ctrl: support i.MX8MP media blk ctrl noc settings
> >   soc: imx: imx8mp-blk-ctrl: introduce HSIO blk ctrl noc settings
> >
> >  .../bindings/interconnect/fsl,imx8m-noc.yaml  |   6 +
> >  arch/arm64/boot/dts/freescale/imx8mp.dtsi     |   7 ++
> >  drivers/soc/imx/gpcv2.c                       |  56 ++++++++-
> >  drivers/soc/imx/imx8m-blk-ctrl.c              | 109
> ++++++++++++++++++
> >  drivers/soc/imx/imx8mp-blk-ctrl.c             |  74 ++++++++++++
> >  5 files changed, 251 insertions(+), 1 deletion(-)
> >
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux