Create separate device node for thermal sensors on apq8064 platform.
Move related properties to the newly created device tree node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index b9e9a9f9d3e2..87e8861d647c 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -105,7 +105,7 @@ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 7>;
+ thermal-sensors = <&tsens 7>;
coefficients = <1199 0>;
trips {
@@ -126,7 +126,7 @@ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 8>;
+ thermal-sensors = <&tsens 8>;
coefficients = <1132 0>;
trips {
@@ -147,7 +147,7 @@ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 9>;
+ thermal-sensors = <&tsens 9>;
coefficients = <1199 0>;
trips {
@@ -168,7 +168,7 @@ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 10>;
+ thermal-sensors = <&tsens 10>;
coefficients = <1132 0>;
trips {
@@ -812,12 +812,21 @@ tsens_backup: backup_calib {
gcc: clock-controller@900000 {
compatible = "qcom,gcc-apq8064";
reg = <0x00900000 0x4000>;
- nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- nvmem-cell-names = "calib", "calib_backup";
#clock-cells = <1>;
#power-domain-cells = <1>;
#reset-cells = <1>;
- #thermal-sensor-cells = <1>;
+
+ tsens: thermal-sensor@900000 {
+ compatible = "qcom,msm8960-tsens";
+
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <11>;
+ #thermal-sensor-cells = <1>;
+ };
};
lcc: clock-controller@28000000 {
--
2.35.1
