Hello,
This patch series adds DT support to the atmel at91sam9 RTC driver.
It also removes any machine specific inclusions to prepare the migration
to multi platform kernel support, and retain the slow clock to prevent
the CCF from disabling it at the end of boot.
Johan, let me know if this version addresses part of your concerns.
I'm open to any suggestion/rework to address other previously discussed
issues, as long as it does not end up in a dead-end (like the discussion
you had last year):
- the fact that the RTT block could be used for something that is not
an RTC
- the fact that referencing the GPBR node and defining a GPBR register
number to store RTC time info could be considered as an HW config and
not an HW description and thus should not be described in the DT
- other things I don't remember :-)
Best Regards,
Boris
Changes since v2:
- make use of syscon/regmap to avoid directly requesting/mapping a GPBR
memory region in the RTT driver
Changes since v1:
- remove non CCF specific case by adding the appropriate clk_lookup
entries in arch/arm/mach-at91/<soc-name>.c files
Boris BREZILLON (8):
rtc: at91sam9: remove references to mach specific headers
rtc: at91sam9: use standard readl/writel functions instead of raw
versions
rtc: at91sam9: replace devm_ioremap by devm_ioremap_resource
rtc: at91sam9: add DT support
rtc: at91sam9: make use of syscon/regmap to access GPBR registers
ARM: at91: add clk_lookup entry for RTT devices
rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
rtc: at91sam9: add DT bindings documentation
.../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 24 ++++
arch/arm/mach-at91/at91sam9260.c | 2 +
arch/arm/mach-at91/at91sam9261.c | 2 +
arch/arm/mach-at91/at91sam9263.c | 4 +
arch/arm/mach-at91/at91sam9g45.c | 2 +
arch/arm/mach-at91/at91sam9rl.c | 2 +
arch/arm/mach-at91/clock.c | 2 +-
arch/arm/mach-at91/clock.h | 1 +
drivers/rtc/Kconfig | 1 +
drivers/rtc/rtc-at91sam9.c | 132 ++++++++++++++++-----
10 files changed, 142 insertions(+), 30 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
