From: Jarrett Schultz <jaschultz@xxxxxxxxxxxxx>
Introduce the imem section in preparation for the surface xbl driver.
Signed-off-by: Jarrett Schultz <jaschultz@xxxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changes in v4:
- N/A
---
Changes in v3:
- N/A
---
Changes in v2:
- Created to properly reference the xbl section inside of imem
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 81b4ff2cc4cd..bcfcb7306cdc 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1175,6 +1175,14 @@ gpi_dma1: dma-controller@a00000 {
status = "disabled";
};
+ imem: imem@146bf000 {
+ compatible = "simple-mfd";
+ reg = <0x0 0x146bf000 0x0 0x1000>;
+ ranges = <0x0 0x0 0x146bf000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
--
2.25.1
