Add missing nodes for the flexcom blocks and a node for the SGPIO block. Then add basic support for the Kontron KSwitch D10. Microchip, please take a closer look at the compatible strings of the newly added nodes. changes since v2: - add second kontron board variant and moved common stuff into a new dtsi - moved the uart/i2c nodes inside of the flexcom node - moved sgpio child nodes inside of the sgpio node changes since v1: - fixed indendation - keep compatible, reg first, move #address-cells and #size-cells towards the end Michael Walle (7): ARM: dts: lan966x: swap dma channels for crypto node ARM: dts: lan966x: add sgpio node ARM: dts: lan966x: add missing uart DMA channel ARM: dts: lan966x: add all flexcom usart nodes ARM: dts: lan966x: add flexcom SPI nodes ARM: dts: lan966x: add flexcom I2C nodes ARM: dts: lan966x: add basic Kontron KSwitch D10 support arch/arm/boot/dts/Makefile | 4 +- ...lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts | 77 ++++++ .../lan966x-kontron-kswitch-d10-mmt-8g.dts | 13 + .../dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 75 ++++++ arch/arm/boot/dts/lan966x.dtsi | 227 +++++++++++++++++- 5 files changed, 392 insertions(+), 4 deletions(-) create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi -- 2.30.2
