Hi, The series adds reset controller support for SAMA7G5 SoCs. Compared with previous version the reset controller embedded on SAMA7G5 is able to reset individual on SoC devices (e.g. USB PHY controllers). Among with this I took the change and converted reset controller bindings to YAML (patch 2/8) and adapt reset controller nodes in device tree files to comply with DT specifications (patch 1/8). Thank you, Claudiu Beznea Claudiu Beznea (8): ARM: dts: at91: use generic name for reset controller dt-bindings: reset: convert Atmel/Microchip reset controller to YAML dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings dt-bindings: reset: add sama7g5 definitions power: reset: at91-reset: add at91_reset_data power: reset: at91-reset: add reset_controller_dev support power: reset: at91-reset: add support for SAMA7G5 ARM: dts: at91: sama7g5: add reset-controller node .../devicetree/bindings/arm/atmel-sysregs.txt | 15 -- .../reset/atmel,at91sam9260-reset.yaml | 68 +++++++++ arch/arm/boot/dts/at91sam9260.dtsi | 2 +- arch/arm/boot/dts/at91sam9261.dtsi | 2 +- arch/arm/boot/dts/at91sam9263.dtsi | 2 +- arch/arm/boot/dts/at91sam9g45.dtsi | 2 +- arch/arm/boot/dts/at91sam9n12.dtsi | 2 +- arch/arm/boot/dts/at91sam9rl.dtsi | 2 +- arch/arm/boot/dts/at91sam9x5.dtsi | 2 +- arch/arm/boot/dts/sam9x60.dtsi | 2 +- arch/arm/boot/dts/sama5d2.dtsi | 2 +- arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d4.dtsi | 2 +- arch/arm/boot/dts/sama7g5.dtsi | 7 + drivers/power/reset/at91-reset.c | 134 ++++++++++++++++-- include/dt-bindings/reset/sama7g5-reset.h | 10 ++ 16 files changed, 217 insertions(+), 39 deletions(-) create mode 100644 Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml create mode 100644 include/dt-bindings/reset/sama7g5-reset.h -- 2.32.0