On Thu, Sep 04, 2014 at 06:43:05PM +0200, Markus Niebel wrote: > From: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx> > > using LVDS channel 1 on an i.MX53 leads to following error: > > imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1 > > This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for > reparenting di1 clock to ldb_di1. The value of the mux param comes from device > tree port settings. > > On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations, > only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1], > respectively) > > Documentation update suggested by Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > > Signed-off-by: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx> Applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
