Re: [PATCH v4 08/12] Documentation: bindings: add doc for the USB2 ChipIdea USB driver

[Peter Chen <peter.chen@xxxxxxxxxxxxx>]

On Wed, Sep 03, 2014 at 09:48:27AM +0200, Antoine Tenart wrote:
> Document the USB2 ChipIdea driver (ci13xxx) bindings.
> 
> Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/usb/ci-hdrc-usb2.txt       | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> new file mode 100644
> index 000000000000..8dd6d8285dab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> @@ -0,0 +1,22 @@
> +* USB2 ChipIdea USB controller for ci13xxx
> +
> +Required properties:
> +- compatible: should be "chipidea,usb2"
> +- reg: base address and length of the registers
> +- interrupts: interrupt for the USB controller
> +
> +Optional properties:
> +- clocks: reference to the USB clock
> +- phys: reference to the USB PHY
> +- vbus-supply: reference to the VBUS regulator
> +
> +Example:
> +
> +	usb@f7ed0000 {
> +		compatible = "chipidea,usb2";
> +		reg = <0xf7ed0000 0x10000>;
> +		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&chip CLKID_USB0>;
> +		phys = <&usb_phy0>;
> +		vbus-supply = <&reg_usb0_vbus>;
> +	};
> -- 
> 1.9.1
> 

This one is ok for me.

-- 
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html