Add device-tree binding documentation for Mediatek SPI-NAND Flash Interface. Signed-off-by: Chuanhong Guo <gch981213@xxxxxxxxx> --- Changes since v1: 1. add a blank line between properties in dt binding doc 2. rename ecc-engine to nand-ecc-engine for the generic properties Change since v2: none .../bindings/spi/mediatek,spi-mtk-snfi.yaml | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml new file mode 100644 index 000000000000..7d57570ad617 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-snfi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI-NAND flash controller for MediaTek ARM SoCs + +maintainers: + - Chuanhong Guo <gch981213@xxxxxxxxx> + +description: | + The Mediatek SPI-NAND flash controller is an extended version of + the Mediatek NAND flash controller. It can perform standard SPI + instructions with one continuous write and one read for up-to 0xa0 + bytes. It also supports typical SPI-NAND page cache operations + in single, dual or quad IO mode with piplined ECC encoding/decoding + using the accompanying ECC engine. There should be only one spi + slave device following generic spi bindings. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + enum: + - mediatek,mt7622-snand + - mediatek,mt7629-snand + + reg: + items: + - description: core registers + + interrupts: + items: + - description: NFI interrupt + + clocks: + items: + - description: clock used for the controller + - description: clock used for the SPI bus + + clock-names: + items: + - const: nfi_clk + - const: pad_clk + + nand-ecc-engine: + description: device-tree node of the accompanying ECC engine. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ecc-engine + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt7622-clk.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + snfi: spi@1100d000 { + compatible = "mediatek,mt7622-snand"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>; + clock-names = "nfi_clk", "pad_clk"; + nand-ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + nand-ecc-engine = <&snfi>; + }; + }; + }; -- 2.35.1
