The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC and is expected to be set to 12MHz. Previously
this was mapped using pre-common clock API calls in the audio machine
driver but the conversion to the common clock framework broke that so
describe things in the DT instead.
Fixes: ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Reviewed-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 87bb39060e8b..ca03685f0f08 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -219,6 +219,12 @@ i2c-gpio-0 {
wm8731: wm8731@1b {
compatible = "wm8731";
reg = <0x1b>;
+
+ /* PCK0 at 12MHz */
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+ clock-names = "mclk";
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+ assigned-clock-rates = <12000000>;
};
};
--
2.30.2
