Re: [PATCH 6/6] dt-bindings: power: supply: qcom,smb2: add bindings for smb2 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/04/2022 09:14, Kuldeep Singh wrote:
> On Fri, Apr 01, 2022 at 09:26:43PM +0100, Caleb Connolly wrote:
>> Add devicetree bindings for the Qualcomm PMI8998/PM660 SMB2 charger
>> drivers.
>>

(...)

> 
>> +    pmic {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +      #interrupt-cells = <4>;
>> +
>> +      smb2@1000 {
>> +        compatible = "qcom,pmi8998-smb2";
>> +        reg = <0x1000>;
>> +
>> +        interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>;
>> +        interrupt-names = "usb-plugin";
>> +
> 
> In-between new lines may not be required.
> And DTs use tabs instead of 2 spaces, we can follow that here also.

The DT examples in bindings use spaces. Either two (like YAML) or four
(for easier reading).

> 
>> +        io-channels = <&pmi8998_rradc 3>,
>> +                      <&pmi8998_rradc 4>;
>> +        io-channel-names = "usbin_i",
>> +                           "usbin_v";
> 
> Channel-names can be written in one line.

They match the format of io-channels, so this is quite readable.



Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux