RE: [PATCH v4 4/5] arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof Kozlowski,

Thanks for the feedback.

> Subject: Re: [PATCH v4 4/5] arm64: dts: renesas: Add initial DTSI for
> RZ/G2UL SoC
> 
> On 02/04/2022 09:30, Biju Das wrote:
> > Add initial DTSI for RZ/G2UL SoC.
> >
> > Both RZ/G2L and RZ/G2UL uses the same SMARC EVK. Therefore they share
> > the common dtsi (rz-smarc.dtsi) file. Place holders are added in
> > device nodes to avoid compilation errors for the devices which have
> > not been enabled yet on RZ/G2UL SoC.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > ---
> > v3->v4:
> >  * Added Rb tag from Geert.
> > v2->v3:
> >  * Replaced clocks from R9A07G043U->R9A07G043
> >  * Replaced compatible from r9a07g043u->r9a07g043
> > v1->v2:
> >  * Changed soc compatible from r9a07g043u->r9a07g043.
> > ---
> >  arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 413
> > +++++++++++++++++++++
> >  1 file changed, 413 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/renesas/r9a07g043.dtsi
> >
> 
> Thank you for your patch. There is something to discuss/improve.
> 
> > diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
> > b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
> > new file mode 100644
> > index 000000000000..ad898cab64a6
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
> > @@ -0,0 +1,413 @@
> > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +/*
> > + * Device Tree Source for the RZ/G2UL SoC
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/clock/r9a07g043-cpg.h>
> > +
> > +/ {
> > +	compatible = "renesas,r9a07g043";
> > +	#address-cells = <2>;
> > +	#size-cells = <2>;
> > +
> > +	audio_clk1: audio_clk1 {
> 
> No underscores in node names, only hyphens, please.

OK. Agreed.

> 
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		/* This value must be overridden by boards that provide it */
> > +		clock-frequency = <0>;
> > +	};
> > +
> > +	audio_clk2: audio_clk2 {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		/* This value must be overridden by boards that provide it */
> > +		clock-frequency = <0>;
> > +	};
> > +
> > +	/* External CAN clock - to be overridden by boards that provide it
> */
> > +	can_clk: can {
> 
> can-clk
OK. Agreed.

> 
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <0>;
> > +	};
> > +
> > +	/* clock can be either from exclk or crystal oscillator (XIN/XOUT)
> */
> > +	extal_clk: extal {
> 
> extal-clk

OK. Agreed.

> 
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		/* This value must be overridden by the board */
> > +		clock-frequency = <0>;
> > +	};
> > +
> > +	cpus {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		cpu0: cpu@0 {
> > +			compatible = "arm,cortex-a55";
> > +			reg = <0>;
> > +			device_type = "cpu";
> > +			next-level-cache = <&L3_CA55>;
> > +			enable-method = "psci";
> > +			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
> > +		};
> > +
> > +		L3_CA55: cache-controller-0 {
> > +			compatible = "cache";
> > +			cache-unified;
> > +			cache-size = <0x40000>;
> > +		};
> > +	};
> > +
> > +	psci {
> > +		compatible = "arm,psci-1.0", "arm,psci-0.2";
> > +		method = "smc";
> > +	};
> > +
> > +	soc: soc {
> > +		compatible = "simple-bus";
> > +		interrupt-parent = <&gic>;
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		ranges;
> > +
> > +		ssi0: ssi@10049c00 {
> > +			reg = <0 0x10049c00 0 0x400>;
> > +			#sound-dai-cells = <0>;
> > +			/* place holder */
> 
> Here and in other place holders - why there are no compatibles here?

These interface are not tested with mainline kernel and will be added later after testing.

> What do you hold place for

As mentioned in commit description, I will get compilation error as the carrier board shared 
with other SoC's For eg:- RZ/G2L,RZ/G2LC and RZ/V2L.

Cheers,
Biju

> 
> > +		};
> > +
> > +		spi1: spi@1004b000 {
> > +			reg = <0 0x1004b000 0 0x400>;
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			/* place holder */
> > +		};
> > +
> > +		scif0: serial@1004b800 {
> > +			compatible = "renesas,scif-r9a07g043",
> > +				     "renesas,scif-r9a07g044";
> > +			reg = <0 0x1004b800 0 0x400>;
> > +			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "eri", "rxi", "txi",
> > +					  "bri", "dri", "tei";
> > +			clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
> > +			clock-names = "fck";
> > +			power-domains = <&cpg>;
> > +			resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
> > +			status = "disabled";
> > +		};
> > +
> > +		scif1: serial@1004bc00 {
> > +			compatible = "renesas,scif-r9a07g043",
> > +				     "renesas,scif-r9a07g044";
> > +			reg = <0 0x1004bc00 0 0x400>;
> > +			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "eri", "rxi", "txi",
> > +					  "bri", "dri", "tei";
> > +			clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>;
> > +			clock-names = "fck";
> > +			power-domains = <&cpg>;
> > +			resets = <&cpg R9A07G043_SCIF1_RST_SYSTEM_N>;
> > +			status = "disabled";
> > +		};
> > +
> > +		scif2: serial@1004c000 {
> > +			compatible = "renesas,scif-r9a07g043",
> > +				     "renesas,scif-r9a07g044";
> > +			reg = <0 0x1004c000 0 0x400>;
> > +			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "eri", "rxi", "txi",
> > +					  "bri", "dri", "tei";
> > +			clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>;
> > +			clock-names = "fck";
> > +			power-domains = <&cpg>;
> > +			resets = <&cpg R9A07G043_SCIF2_RST_SYSTEM_N>;
> > +			status = "disabled";
> > +		};
> > +
> > +		scif3: serial@1004c400 {
> > +			compatible = "renesas,scif-r9a07g043",
> > +				     "renesas,scif-r9a07g044";
> > +			reg = <0 0x1004c400 0 0x400>;
> > +			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "eri", "rxi", "txi",
> > +					  "bri", "dri", "tei";
> > +			clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>;
> > +			clock-names = "fck";
> > +			power-domains = <&cpg>;
> > +			resets = <&cpg R9A07G043_SCIF3_RST_SYSTEM_N>;
> > +			status = "disabled";
> > +		};
> > +
> > +		scif4: serial@1004c800 {
> > +			compatible = "renesas,scif-r9a07g043",
> > +				     "renesas,scif-r9a07g044";
> > +			reg = <0 0x1004c800 0 0x400>;
> > +			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "eri", "rxi", "txi",
> > +					  "bri", "dri", "tei";
> > +			clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>;
> > +			clock-names = "fck";
> > +			power-domains = <&cpg>;
> > +			resets = <&cpg R9A07G043_SCIF4_RST_SYSTEM_N>;
> > +			status = "disabled";
> > +		};
> > +
> > +		sci0: serial@1004d000 {
> > +			compatible = "renesas,r9a07g043-sci", "renesas,sci";
> > +			reg = <0 0x1004d000 0 0x400>;
> > +			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "eri", "rxi", "txi", "tei";
> > +			clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>;
> > +			clock-names = "fck";
> > +			power-domains = <&cpg>;
> > +			resets = <&cpg R9A07G043_SCI0_RST>;
> > +			status = "disabled";
> > +		};
> > +
> > +		sci1: serial@1004d400 {
> > +			compatible = "renesas,r9a07g043-sci", "renesas,sci";
> > +			reg = <0 0x1004d400 0 0x400>;
> > +			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "eri", "rxi", "txi", "tei";
> > +			clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>;
> > +			clock-names = "fck";
> > +			power-domains = <&cpg>;
> > +			resets = <&cpg R9A07G043_SCI1_RST>;
> > +			status = "disabled";
> > +		};
> > +
> > +		canfd: can@10050000 {
> > +			reg = <0 0x10050000 0 0x8000>;
> > +			/* place holder */
> > +		};
> > +
> > +		i2c0: i2c@10058000 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0 0x10058000 0 0x400>;
> > +			/* place holder */
> > +		};
> > +
> > +		i2c1: i2c@10058400 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0 0x10058400 0 0x400>;
> > +			/* place holder */
> > +		};
> > +
> > +		i2c3: i2c@10058c00 {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0 0x10058c00 0 0x400>;
> > +			/* place holder */
> > +		};
> > +
> > +		adc: adc@10059000 {
> > +			reg = <0 0x10059000 0 0x400>;
> > +			/* place holder */
> > +		};
> > +
> > +		sbc: spi@10060000 {
> > +			reg = <0 0x10060000 0 0x10000>,
> > +			      <0 0x20000000 0 0x10000000>,
> > +			      <0 0x10070000 0 0x10000>;
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			/* place holder */
> > +		};
> > +
> > +		cpg: clock-controller@11010000 {
> > +			compatible = "renesas,r9a07g043-cpg";
> > +			reg = <0 0x11010000 0 0x10000>;
> > +			clocks = <&extal_clk>;
> > +			clock-names = "extal";
> > +			#clock-cells = <2>;
> > +			#reset-cells = <1>;
> > +			#power-domain-cells = <0>;
> > +		};
> > +
> > +		sysc: system-controller@11020000 {
> > +			compatible = "renesas,r9a07g043-sysc";
> > +			reg = <0 0x11020000 0 0x10000>;
> > +			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "lpm_int", "ca55stbydone_int",
> > +					  "cm33stbyr_int", "ca55_deny";
> > +			status = "disabled";
> > +		};
> > +
> > +		pinctrl: pinctrl@11030000 {
> > +			reg = <0 0x11030000 0 0x10000>;
> > +			gpio-controller;
> > +			#gpio-cells = <2>;
> > +			/* place holder */
> > +		};
> > +
> > +		dmac: dma-controller@11820000 {
> > +			compatible = "renesas,r9a07g043-dmac",
> > +				     "renesas,rz-dmac";
> > +			reg = <0 0x11820000 0 0x10000>,
> > +			      <0 0x11830000 0 0x10000>;
> > +			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
> > +				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
> > +			interrupt-names = "error",
> > +					  "ch0", "ch1", "ch2", "ch3",
> > +					  "ch4", "ch5", "ch6", "ch7",
> > +					  "ch8", "ch9", "ch10", "ch11",
> > +					  "ch12", "ch13", "ch14", "ch15";
> > +			clocks = <&cpg CPG_MOD R9A07G043_DMAC_ACLK>,
> > +				 <&cpg CPG_MOD R9A07G043_DMAC_PCLK>;
> > +			power-domains = <&cpg>;
> > +			resets = <&cpg R9A07G043_DMAC_ARESETN>,
> > +				 <&cpg R9A07G043_DMAC_RST_ASYNC>;
> > +			#dma-cells = <1>;
> > +			dma-channels = <16>;
> > +		};
> > +
> > +		gic: interrupt-controller@11900000 {
> > +			compatible = "arm,gic-v3";
> > +			#interrupt-cells = <3>;
> > +			#address-cells = <0>;
> > +			interrupt-controller;
> > +			reg = <0x0 0x11900000 0 0x40000>,
> > +			      <0x0 0x11940000 0 0x60000>;
> > +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> > +		};
> > +
> > +		sdhi0: mmc@11c00000  {
> > +			reg = <0x0 0x11c00000 0 0x10000>;
> > +			/* place holder */
> > +		};
> > +
> > +		sdhi1: mmc@11c10000 {
> > +			reg = <0x0 0x11c10000 0 0x10000>;
> > +			/* place holder */
> > +		};
> > +
> > +		phyrst: usbphy-ctrl@11c40000 {
> 
> If this is phy, then preferrably just "phy" for node name.

It is not phy. It is phy reset control. Which controls the phy reset.

Regards,
Biju




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux