The binding and driver duplicated regulator core feature of controlling
regulators with GPIOs (of_parse_cb + ena_gpiod) and created its own
enable-gpios property with multiple GPIOs.
This is a less preferred way, because enable-gpios should enable only one
element, not multiple. It also duplicates existing solution.
Deprecate the original 'enable-gpios' and add per-regulator property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../regulator/richtek,rt4801-regulator.yaml | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
index 4a4dfa7d9d09..091150c4e579 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
@@ -32,8 +32,11 @@ properties:
If only one gpio is specified, only one gpio used to control ENP/ENM.
Else if both are specified, DSVP/DSVN could be controlled individually.
If this property not specified, treat both as always-on regulators.
+
+ Property is deprecated. Use enable-gpios in each regulator.
minItems: 1
maxItems: 2
+ deprecated: true
patternProperties:
"^DSV(P|N)$":
@@ -42,6 +45,14 @@ patternProperties:
description:
Properties for single display bias regulator.
+ properties:
+ enable-gpios:
+ description:
+ GPIO to use to enable DSVP/DSVN regulator. One GPIO can be configured
+ for controlling both regulators. If this property not specified for
+ any regulator, treat both as always-on regulators.
+ maxItems: 1
+
required:
- compatible
- reg
@@ -57,19 +68,20 @@ examples:
rt4801@73 {
compatible = "richtek,rt4801";
reg = <0x73>;
- enable-gpios = <&gpio26 2 0>, <&gpio26 3 0>;
dsvp: DSVP {
regulator-name = "rt4801,dsvp";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <6000000>;
regulator-boot-on;
+ enable-gpios = <&gpio26 2 0>;
};
dsvn: DSVN {
regulator-name = "rt4801,dsvn";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <6000000>;
regulator-boot-on;
+ enable-gpios = <&gpio26 3 0>;
};
};
--
2.32.0
