Dear Krzysztof: > > Add mmc yaml file for Sunplus SP7021 > > s/mmc/MMC/ > s/yaml/YAML/ > And a full stop. > OK, I will modify it. > Please rebase your changes on recent Linux kernel, because you skip Cc-ing me > all the time, so I assume you have some old Maintainers file. > OK, I will pay attention. > > > > Signed-off-by: Tony Huang <tonyhuang.sunplus@xxxxxxxxx> > > --- > > Changes in v5: > > - Addressed comments from Krzysztof. > > > > .../devicetree/bindings/mmc/sunplus,mmc.yaml | 64 > ++++++++++++++++++++++ > > MAINTAINERS | 6 ++ > > 2 files changed, 70 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml > > > > diff --git a/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml > > b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml > > new file mode 100644 > > index 0000000..92537d0 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml > > @@ -0,0 +1,64 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright > > +(C) Sunplus Ltd. Co. 2021 %YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/mmc/sunplus,mmc.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Sunplus MMC Controller > > + > > +maintainers: > > + - Tony Huang <tonyhuang.sunplus@xxxxxxxxx> > > + - Li-hao Kuo <lhjeff911@xxxxxxxxx> > > + > > +allOf: > > + - $ref: "mmc-controller.yaml" > > + > > +properties: > > + compatible: > > + enum: > > + - sunplus,sp7021-mmc > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > + resets: > > + maxItems: 1 > > + > > + max-frequency: true > > I think you do not need this. > OK, I will modify it. > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - clocks > > + - resets > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + mmc0: mmc@9c003b00 { > > + compatible = "sunplus,mmc-v2"; > > + reg = <0x9c003b00 0x180>; > > + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clkc 0x4e>; > > + resets = <&rstc 0x3e>; > > + bus-width = <8>; > > + max-frequency = <52000000>; > > + non-removable; > > + disable-wp; > > + cap-mmc-highspeed; > > + mmc-ddr-3_3v; > > + no-sdio; > > + no-sd; > > + }; > > + > > diff --git a/MAINTAINERS b/MAINTAINERS index fb18ce7..42498b2 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -18242,6 +18242,12 @@ L: netdev@xxxxxxxxxxxxxxx > > S: Maintained > > F: drivers/net/ethernet/dlink/sundance.c > > > > +SUNPLUS MMC DRIVER > > +M: Tony Huang <tonyhuang.sunplus@xxxxxxxxx> > > +M: Li-hao Kuo <lhjeff911@xxxxxxxxx> > > +S: Maintained > > +F: Documentation/devicetree/bindings/mmc/sunplu,mmc.yaml > > I pointed this already for your v4. > Sorry, I will modify it.
