Re: [RFC] arm64: dts: ti: introduce a minimal am642 device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Wadim,

On 30/03/22 7:25 pm, Wadim Egorov wrote:
> Hi Bryan,
> 
>> +/* (optional) for console */
>> +&main_uart0 {
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&main_uart0_pins_default>;
>> +};
>> +
>> +/* reserved for firmware */
>> +&main_uart1 {
>> +    status = "reserved";
>> +};
> 
> k3-image-gen says UART0 is used as a debug interface. See
> 
> 
> https://git.ti.com/cgit/k3-image-gen/k3-image-gen/tree/soc/am64x/evm/board-cfg.c#n81
> 
> 
> So it seems that you can enable uart1 here. But people may run into a
> conflict with uart0 and k3-image-gen compiled with ENABLE_TRACE=1.
> 
> If I am wrong, can you please clarify why you mark uart1 as reserved.
> 

We just seem to have same macro shared across multiple SoCs,
BOARDCFG_TRACE_DST_UART0 means logs are also directed to UART. Instance
of UART used for logging is platform specific.

On AM64 SYSFW logs are directed to MAIN UART1 (MAIN UART0 is used for
linux console). I will work internally and get SYSFW documentation
updated to reflect the same. Thanks!

Regards
Vignesh



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux