Hi Guillaume, >DP_INTF is similar to DPI but does not have the exact same feature set >or register layouts. > >DP_INTF is the sink of the display pipeline that is connected to the >DisplayPort controller and encoder unit. It takes the same clocks as >DPI. > >Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> >Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx> >Reviewed-by: Rob Herring <robh@xxxxxxxxxx> >--- > .../bindings/display/mediatek/mediatek,dpi.yaml | 11 ++++++----- > 1 file changed, 6 insertions(+), 5 deletions(-) > >diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml >index dd2896a40ff0..2dba80ad3b18 100644 >--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml >+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml >@@ -4,16 +4,16 @@ > $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml# > $schema: http://devicetree.org/meta-schemas/core.yaml# > >-title: mediatek DPI Controller Device Tree Bindings >+title: mediatek DPI/DP_INTF Controller ^^^^^^^^ Would you mind changing this 'mediatek' to 'MediaTek'? > > maintainers: > - CK Hu <ck.hu@xxxxxxxxxxxx> > - Jitao shi <jitao.shi@xxxxxxxxxxxx> > > description: | >- The Mediatek DPI function block is a sink of the display subsystem and > s/Mediatek/MediaTek/ Could you replace all 'Mediatek' with 'MediaTek' of this series, please? We have set up a chcker inside our organization to capture this case, hopefully we will see less 'Mediatek' in the future. >- provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel >- output bus. >+ The Mediatek DPI and DP_INTF function blocks are a sink of the display s/Mediatek/MediaTek/ thanks, Miles >+ subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a >+ parallel output bus. > > properties: > compatible: >@@ -23,6 +23,7 @@ properties: > - mediatek,mt8173-dpi > - mediatek,mt8183-dpi > - mediatek,mt8192-dpi >+ - mediatek,mt8195-dpintf > > reg: > maxItems: 1 >@@ -54,7 +55,7 @@ properties: > $ref: /schemas/graph.yaml#/properties/port > description: > Output port node. This port should be connected to the input port of an >- attached HDMI or LVDS encoder chip. >+ attached HDMI, LVDS or DisplayPort encoder chip. > > required: > - compatible >-- >2.34.1 > >
