Re: [Patch v5 2/4] memory: tegra: Add MC error logging on tegra186 onward

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/16/22 12:25, Ashish Mhetre wrote:
> Add new function 'get_int_channel' in tegra_mc_soc struture which is
> implemented by tegra SOCs which support multiple MC channels. This
> function returns the channel which should be used to get the information
> of interrupts.
> Remove static from tegra30_mc_handle_irq and use it as interrupt handler
> for MC interrupts on tegra186, tegra194 and tegra234 to log the errors.
> Add error specific MC status and address register bits and use them on
> tegra186, tegra194 and tegra234.
> Add error logging for generalized carveout interrupt on tegra186, tegra194
> and tegra234.
> Add error logging for route sanity interrupt on tegra194 an tegra234.
> Add register for higher bits of error address which is available on
> tegra194 and tegra234.
> Add a boolean variable 'has_addr_hi_reg' in tegra_mc_soc struture which
> will be true if soc has register for higher bits of memory controller
> error address. Set it true for tegra194 and tegra234.
> 
> Signed-off-by: Ashish Mhetre <amhetre@xxxxxxxxxx>

> Reported-by: kernel test robot <lkp@xxxxxxxxx>
> Reported-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>

Reported what? You should add this tag only if patch addresses reported
problem. This patch doesn't address anything, hence the tag is
inappropriate, you should remove it.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux