Corstone1000 is a platform from arm, which includes pre verified Corstone SSE710 sub-system that combines Cortex-A and Cortex-M processors [0]. These device trees contains the necessary bits to support the Corstone 1000 FVP (Fixed Virtual Platform) [1] and the FPGA MPS3 board Cortex-A35 implementation at Cortex-A35 host side of this platform. [2] 0: https://documentation-service.arm.com/static/619e02b1f45f0b1fbf3a8f16 1: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps 2: https://documentation-service.arm.com/static/61f3f4d7fa8173727a1b71bf Signed-off-by: Rui Miguel Silva <rui.silva@xxxxxxxxxx> --- arch/arm64/boot/dts/arm/Makefile | 1 + arch/arm64/boot/dts/arm/corstone1000-fvp.dts | 27 +++ arch/arm64/boot/dts/arm/corstone1000-mps3.dts | 36 ++++ arch/arm64/boot/dts/arm/corstone1000.dtsi | 161 ++++++++++++++++++ 4 files changed, 225 insertions(+) create mode 100644 arch/arm64/boot/dts/arm/corstone1000-fvp.dts create mode 100644 arch/arm64/boot/dts/arm/corstone1000-mps3.dts create mode 100644 arch/arm64/boot/dts/arm/corstone1000.dtsi diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 4382b73baef5..d908e96d7ddc 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb juno-scmi.dtb ju dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts new file mode 100644 index 000000000000..dea8b5f4d68a --- /dev/null +++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2022, Linaro Limited. All rights reserved. + * + */ + +/dts-v1/; + +#include "corstone1000.dtsi" + +/ { + model = "ARM Corstone1000 FVP (Fixed Virtual Platform)"; + compatible = "arm,corstone1000-fvp"; + + smsc: ethernet@4010000 { + compatible = "smsc,lan91c111"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <2>; + }; +}; + +&cpu { + compatible = "arm,armv8"; +}; diff --git a/arch/arm64/boot/dts/arm/corstone1000-mps3.dts b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts new file mode 100644 index 000000000000..9989586db70e --- /dev/null +++ b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2022, Linaro Limited. All rights reserved. + * + */ + +/dts-v1/; + +#include "corstone1000.dtsi" + +/ { + model = "ARM Corstone1000 FPGA MPS3 board"; + compatible = "arm,corstone1000-mps3"; + + smsc: ethernet@4010000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <2>; + smsc,irq-push-pull; + }; + + usb_host: usb@40200000 { + compatible = "nxp,usb-isp1763"; + reg = <0x40200000 0x100000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <16>; + dr_mode = "host"; + }; +}; + +&cpu { + compatible = "arm,cortex-a35"; +}; diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi new file mode 100644 index 000000000000..194d959de828 --- /dev/null +++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2022, Linaro Limited. All rights reserved. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu: cpu@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + }; + }; + + memory@88200000 { + device_type = "memory"; + reg = <0x88200000 0x77e00000>; + }; + + gic: interrupt-controller@1c000000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1c010000 0x1000>, + <0x1c02f000 0x2000>, + <0x1c04f000 0x1000>, + <0x1c06f000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + + refclk100mhz: refclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "apb_pclk"; + }; + + smbclk: refclk24mhzx2 { + /* Reference 24MHz clock x 2 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "smclk"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + uartclk: uartclk { + /* UART clock - 50MHz */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "uartclk"; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + timer@1a220000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x1a220000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + clock-frequency = <50000000>; + ranges; + + frame@1a230000 { + frame-number = <0>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x1a230000 0x1000>; + }; + }; + + uart0: serial@1a510000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1a510000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart1: serial@1a520000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1a520000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + mhu_hse1: mailbox@1b820000 { + compatible = "arm,mhuv2-tx", "arm,primecell"; + reg = <0x1b820000 0x1000>; + clocks = <&refclk100mhz>; + clock-names = "apb_pclk"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + arm,mhuv2-protocols = <0 0>; + secure-status = "okay"; /* secure-world-only */ + status = "disabled"; + }; + + mhu_seh1: mailbox@1b830000 { + compatible = "arm,mhuv2-rx", "arm,primecell"; + reg = <0x1b830000 0x1000>; + clocks = <&refclk100mhz>; + clock-names = "apb_pclk"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + arm,mhuv2-protocols = <0 0>; + secure-status = "okay"; /* secure-world-only */ + status = "disabled"; + }; + }; +}; -- 2.35.1
