Convert rockchip,px30-cru.txt to YAML.
Changes against original bindings:
Use compatible string: "rockchip,px30-pmucru"
Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
.../bindings/clock/rockchip,px30-cru.txt | 70 --------------
.../bindings/clock/rockchip,px30-cru.yaml | 96 +++++++++++++++++++
2 files changed, 96 insertions(+), 70 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
create mode 100644 Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
deleted file mode 100644
index 55e78cdde..000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Rockchip PX30 Clock and Reset Unit
-
-The PX30 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
-- compatible: CRU should be "rockchip,px30-cru"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
- in clock-names
-- clock-names: Should contain the following:
- - "xin24m" for both PMUCRU and CRU
- - "gpll" for CRU (sourced from PMUCRU)
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
- If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "i2sx_clkin" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
- pmucru: clock-controller@ff2bc000 {
- compatible = "rockchip,px30-pmucru";
- reg = <0x0 0xff2bc000 0x0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- cru: clock-controller@ff2b0000 {
- compatible = "rockchip,px30-cru";
- reg = <0x0 0xff2b0000 0x0 0x1000>;
- rockchip,grf = <&grf>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
-Example: UART controller node that consumes the clock generated by the clock
- controller:
-
- uart0: serial@ff030000 {
- compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff030000 0x0 0x100>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
- clock-names = "baudclk", "apb_pclk";
- reg-shift = <2>;
- reg-io-width = <4>;
- };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
new file mode 100644
index 000000000..aa095f375
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Clock and Reset Unit (CRU)
+
+maintainers:
+ - Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
+ - Heiko Stuebner <heiko@xxxxxxxxx>
+
+description: |
+ The PX30 clock controller generates and supplies clocks to various
+ controllers within the SoC and also implements a reset controller for SoC
+ peripherals.
+ Each clock is assigned an identifier and client nodes can use this identifier
+ to specify the clock which they consume. All available clocks are defined as
+ preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+ used in device tree sources. Similar macros exist for the reset sources in
+ these files.
+ There are several clocks that are generated outside the SoC. It is expected
+ that they are defined using standard clock bindings with following
+ clock-output-names:
+ - "xin24m" - crystal input - required
+ - "xin32k" - rtc clock - optional
+ - "i2sx_clkin" - external I2S clock - optional
+ - "gmac_clkin" - external GMAC clock - optional
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-cru
+ - rockchip,px30-pmucru
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: Clock for both PMUCRU and CRU
+ - description: Clock for CRU (sourced from PMUCRU)
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: xin24m
+ - const: gpll
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the "general register files" (GRF),
+ if missing pll rates are not changeable, due to the missing pll
+ lock status.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - "#clock-cells"
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/px30-cru.h>
+
+ pmucru: clock-controller@ff2bc000 {
+ compatible = "rockchip,px30-pmucru";
+ reg = <0xff2bc000 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ cru: clock-controller@ff2b0000 {
+ compatible = "rockchip,px30-cru";
+ reg = <0xff2b0000 0x1000>;
+ clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+ clock-names = "xin24m", "gpll";
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
--
2.20.1
