In some SGMII use cases where both a fixed link external PHY and the
internal PCS/PMA PHY need to be configured, we should explicitly use a
phandle "pcs-phy" to get the reference to the PCS/PMA PHY. Otherwise, the
driver would use "phy-handle" in the DT as the reference to both the
external and the internal PCS/PMA PHY.
In other cases where the core is connected to a SFP cage, we could still
point phy-handle to the intenal PCS/PMA PHY, and let the driver connect
to the SFP module, if exist, via phylink.
Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode)
Signed-off-by: Andy Chiu <andy.chiu@xxxxxxxxxx>
Reviewed-by: Greentime Hu <greentime.hu@xxxxxxxxxx>
Reviewed-by: Robert Hancock <robert.hancock@xxxxxxxxxx>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index a4783f95b979..6749d0eebc13 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2067,9 +2067,16 @@ static int axienet_probe(struct platform_device *pdev)
if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII ||
lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
- np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
+ np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0);
if (!np) {
- dev_err(&pdev->dev, "phy-handle required for 1000BaseX/SGMII\n");
+ /* Deprecated: Always use "pcs-handle" for pcs_phy.
+ * Falling back to "phy-handle" here is only for
+ * backward compatibility with old device trees.
+ */
+ np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
+ }
+ if (!np) {
+ dev_err(&pdev->dev, "pcs-handle (preferred) or phy-handle required for 1000BaseX/SGMII\n");
ret = -EINVAL;
goto cleanup_mdio;
}
--
2.34.1
