Re: [PATCH 3/5] arm64: dts: imx8mp: Enable HS400-ES

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Adam,

On 27.03.22 14:38, Adam Ford wrote:
> The SDHC controller in the imx8mp has the same controller
> as the imx8mm which supports HS400-ES. Change the compatible
> fallback to imx8mm to enable it.

I believe that's a shortcoming of the Linux driver, which should explicitly list
fsl,imx8mp-usdhc in its compatibles and enable HS400-ES for it.

I find dropping compatibles problematic, because like Linux matching
fsl,imx8mm-usdhc, but not fsl,imx8mp-usdhc, other software may match
fsl,imx7d-usdhc, but not fsl,imx8[mp]-usdhc.

I'd prefer that either the kernel driver gains extra compatibles or that
the DTS lists extra compatibles and we refrain from dropping existing
(correct) ones.

What do you think?

Cheers,
Ahmad

> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 794d75173cf5..d5ee1520f1fe 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -769,7 +769,7 @@ i2c6: i2c@30ae0000 {
>  			};
>  
>  			usdhc1: mmc@30b40000 {
> -				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
> +				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc";
>  				reg = <0x30b40000 0x10000>;
>  				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX8MP_CLK_DUMMY>,
> @@ -783,7 +783,7 @@ usdhc1: mmc@30b40000 {
>  			};
>  
>  			usdhc2: mmc@30b50000 {
> -				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
> +				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc";
>  				reg = <0x30b50000 0x10000>;
>  				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX8MP_CLK_DUMMY>,
> @@ -797,7 +797,7 @@ usdhc2: mmc@30b50000 {
>  			};
>  
>  			usdhc3: mmc@30b60000 {
> -				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
> +				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc";
>  				reg = <0x30b60000 0x10000>;
>  				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clk IMX8MP_CLK_DUMMY>,


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux