Re: Autoloading of SPI/nor driver on kirkwood (qnap devices)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




+ devicetree, as the names are used in DTS file.

On Wed, Sep 10, 2014 at 8:11 AM, Brian Norris
<computersforpeace@xxxxxxxxx> wrote:
> + Huang (his Freescale address is bouncing), Rafal
>
> On Tue, Sep 9, 2014 at 11:00 PM, Brian Norris
> <computersforpeace@xxxxxxxxx> wrote:
>> On Thu, Sep 04, 2014 at 09:02:04AM +0200, Geert Uytterhoeven wrote:
>>> On Thu, Sep 4, 2014 at 4:11 AM, Ben Hutchings <ben@xxxxxxxxxxxxxxx> wrote:
>>> >> I noticed that many platforms declare the flash chip as compatible =
>>> >> "st,m25pXXX" whereas the ts219.dtsi just said m25p128 but I tried
>>> >> changing that and it didn't help. In any case without spi-nor.ko being
>>> >> autoloaded I don't support m25p80.ko ever would be.
>>> >
>>> > m25p80.c has:
>>> >
>>> > static struct spi_driver m25p80_driver = {
>>> >         ...
>>> >         .id_table       = spi_nor_ids,
>>> >         ...
>>> > };
>>> >
>>> > while spi_nor_ids is defined in spi-nor.c.  Since they end up as two
>>> > separate modules, modpost can't read the ID table and add the device ID
>>> > aliases to m25p80.ko.
>>>
>>> Woops. This indeed doesn't work.
>>> Note that the MODULE_DEVICE_TABLE() is also gone from m25p80.c
>>>
>>> So m25p80.c needs to contain the IDs, while spi-nor.c also needs the IDs
>>> because it's a framework/library.
>>
>> Actually, m25p80.c only needs the strings (i.e., the named aliases --
>> character data), and for the most part, spi-nor.c only needs the IDs (i.e.,
>> the identification bytes).
>>
>> What's more, I don't think that any modern SPI NOR user really needs to
>> be specifying exactly which SPI device it is via a specific string. Our
>> driver code pretty much always re-detects the device by reading its
>> device ID. All the SPI NOR code needs to know is how to read its ID.

But the proper name should be in the compatible property.

>>> A quick solution would be to move the ID table to a header file, and include
>>> that by both, and re-add the lost MODULE_DEVICE_TABLE() to m25p80.c.
>>> That duplicates the data, though.
>>>
>>> Hmm, for the built-in case, we can avoid the duplication by letting m25p80.c
>>> refer to the table in spi-nor.c if !MODULE.
>>> Does anyone see a better solution?
>>
>> A little bit of a shot in the dark, as I haven't fleshed this one out:
>>
>> Would it work to just copy the SPI ID strings into m25p80.c, keep the
>> full table in spi-nor.c, stop adding SPI ID string (and DT) bindings to
>> the m25p80 table (force platforms to use "m25p80"-compatible probing, or
>> maybe something generic like "spi-nor-rdid", "spi-nor-sfdp", etc.) and
>> eventually kill the strings from spi-nor.c entirely? I really don't want
>> to propagate string-binding much further into the SPI NOR library, since
>> everything should be auto-detectable--partly just by an ID table as we
>> have now, but eventually we can use CFI or SFDP parameters provided by
>> relatively new SPI NOR chips.

How does the SPI core know to use m25p80? From the ids, and the compatible
value. If you won't add new names, all devices should declare compatiblity
with "m25p80" (that's "spansion,m25p80", right?) as a fallback.
However, are all devices really compatible with m25p80?
I.e. does m25p80.c work will all devices, in the absense of support for the
real device? If not, the fallback must not be there, and new device names
must be added.

>> I'm not sure if this is great for the short-term problem of fixing
>> module-autoloading. Perhaps we should do a short-term hack to duplicate
>> the SPI ID strings to m25p80.c by including them in a header (and
>> backport for 3.16.y stable?), but I'd like to disentangle this.
>>
>> Brian

Autoloading is based on "spi:<name>". If new names aren't added, m25p80
won't be loaded for new SPI FLASHes, unless I'm missing something?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux