This is the initial version of the RK808 PMIC. This is a power management IC for multimedia products. It provides regulators that are able to supply power to processor cores and other components. The chip provides other modules including RTC, Clockout Changes in v10: Adviced by Doug - modify rk808_rtc->irq err print Adviced by Mike - remove rk808_clkout1_is_prepared Adviced by Dmitry Torokhov - add rk808_clkout_remove Changes in v9: Adviced by Dmitry - if(rk808_rtc->irq < 0), return rk808_rtc->irq Adviced by Doug - add reg_np Changes in v8: Adviced by Doug - coding style - fix regmap_update_bits() - if(rk808_rtc->irq < 0) return err num Adviced by Mike - rename "control" to "enable" - define RK808_NR_OUTPUT 2 Adviced by Doug - remove rk808_regulator_dts() function - remove the check about "client->dev.of_node" Changes in v7: Adviced by doug - read rtc time from shadowed registers Adviced by Dmitry - use CONFIG_PM_SLEEP replace CONFIG_PM - use SIMPLE_DEV_PM_OPS replace dev_pm_ops - fix dev_warn - coding style Adviced by Heiko - remove rtc_ctl Adviced by doug -fix coding style problems - remove pdata struct from header file, add rk808_regulator struct Changes in v6: Adviced by doug - move RTC_READSEL setting into probe Adviced by doug - use correct argument call of_clk_add_provider in probe - remove the redundant code Changes in v5: - fixed a bug about set_time failed Adviced by doug - add some error checking in probe - move "rockchip,rk808.h" into the patch about dt-bindings - re-edit base on Mark's branch Changes in v4: - use &client->dev replace rk808->dev Adviced by doug - add "clock-output-names" propertiey - add a header file "rockchip,rk808.h" - use &client->dev replace rk808->dev Changes in v3: - fix compile err Changes in v2: Adviced by javier.martinez - Add a separate clock driver, rather than in RTC driver Adviced by javier.martinez - separated from rtc-rk808.c Adviced by Mark Browm: - change of_find_node_by_name to find_child_by_name - use RK808_NUM_REGULATORS as the name of the constant - create a pdata when missing platform data - use the rk808_reg name to supply_regulator name - replace regulator_register with devm_regulator_register - some other problem with coding style Chris Zhong (3): RTC: RK808: add RTC driver for RK808 clk: RK808: Add clkout driver for RK808 regulator: RK808: Remove pdata from the regulator drivers/clk/Kconfig | 9 + drivers/clk/Makefile | 1 + drivers/clk/clk-rk808.c | 170 ++++++++++++++ drivers/regulator/rk808-regulator.c | 89 ++------ drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rk808.c | 427 +++++++++++++++++++++++++++++++++++ 7 files changed, 635 insertions(+), 72 deletions(-) create mode 100644 drivers/clk/clk-rk808.c create mode 100644 drivers/rtc/rtc-rk808.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
