On 2022/3/23 04:49, Rob Herring wrote:
+/*
+ * mainly for dc in ls7a1000 which have builtin gpio emulated i2c
+ *
+ * @index : output channel index, 0 for DVO0, 1 for DVO1
+ */
+struct lsdc_i2c *lsdc_create_i2c_chan(struct device *dev, void *base, unsigned int index)
+{
+ char compat[32] = {0};
+ unsigned int udelay = 5;
+ unsigned int timeout = 2200;
+ int nr = -1;
+ struct i2c_adapter *adapter;
+ struct lsdc_i2c *li2c;
+ struct device_node *i2c_np;
+ int ret;
+
+ li2c = devm_kzalloc(dev, sizeof(*li2c), GFP_KERNEL);
+ if (!li2c)
+ return ERR_PTR(-ENOMEM);
+
+ li2c->index = index;
+ li2c->dev = dev;
+
+ if (index == 0) {
+ li2c->sda = 0x01;
+ li2c->scl = 0x02;
+ } else if (index == 1) {
+ li2c->sda = 0x04;
+ li2c->scl = 0x08;
Just require this to be in DT rather than having some default.
By design, I am try very hard to let the code NOT fully DT dependent. DT is nice , easy to learn and use.
But kernel side developer plan to follow UEFI + ACPI Specification on LS3A5000 + LS7A1000 platform. See [1]
There will no DT support then, provide a convention support make the driver more flexible. I want the
driver works with minimal requirement. The driver just works on simple boards by put the following dc device
node in arch/mips/dts/loongson/loongson64g_4core_ls7a.dts,
lsdc: display-controller@6,1 {
compatible = "loongson,ls7a1000-dc";
reg = <0x3100 0x0 0x0 0x0 0x0>;
interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pic>;
};
[1]
https://lwn.net/Articles/869541/#:~:text=LoongArch%20is%20a%20new%20RISC%20ISA%2C%20which%20is,revision%20of%20ACPI%20Specification%20%28current%20revision%20is%206.4%29.
