Re: [PATCH v5 3/3] drm/panel : innolux-ej030na and abt-y030xx067a : add .enable and .disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Following the introduction of bridge_atomic_enable in the ingenic
drm driver, the crtc is enabled between .prepare and .enable, if
it exists. Add it so the backlight is only enabled after the crtc is, to
avoid graphical issues.

As we're moving the "sleep in" command out of the init sequence
into .enable for the ABT, we need to switch the regmap cache
to REGCACHE_FLAT to be able to use regmap_set_bits, given this
panel registers are write-ony and read as 0.

On Mon, Mar 21, 2022 at 3:21 PM Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
>
> Hi Christophe,
>
> Le lun., mars 21 2022 at 14:36:51 +0100, Christophe Branchereau
> <cbranchereau@xxxxxxxxx> a écrit :
> > Following the introduction of bridge_atomic_enable in the ingenic
> > drm driver, the crtc is enabled between .prepare and .enable, if
> > it exists.
> >
> > Add it so the backlight is only enabled after the crtc is, to avoid
> > graphical issues.
> >
> > Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx>
>
> Didn't Sam acked it?
>
> > ---
> >  drivers/gpu/drm/panel/panel-abt-y030xx067a.c  | 31
> > +++++++++++++++++--
> >  drivers/gpu/drm/panel/panel-innolux-ej030na.c | 31
> > ++++++++++++++++---
> >  2 files changed, 55 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> > b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> > index f043b484055b..ddfacaeac1d4 100644
> > --- a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> > +++ b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> > @@ -140,7 +140,7 @@ static const struct reg_sequence
> > y030xx067a_init_sequence[] = {
> >       { 0x03, REG03_VPOSITION(0x0a) },
> >       { 0x04, REG04_HPOSITION1(0xd2) },
> >       { 0x05, REG05_CLIP | REG05_NVM_VREFRESH | REG05_SLBRCHARGE(0x2) },
> > -     { 0x06, REG06_XPSAVE | REG06_NT },
> > +     { 0x06, REG06_NT },
> >       { 0x07, 0 },
> >       { 0x08, REG08_PANEL(0x1) | REG08_CLOCK_DIV(0x2) },
> >       { 0x09, REG09_SUB_BRIGHT_R(0x20) },
> > @@ -183,8 +183,6 @@ static int y030xx067a_prepare(struct drm_panel
> > *panel)
> >               goto err_disable_regulator;
> >       }
> >
> > -     msleep(120);
> > -
> >       return 0;
> >
> >  err_disable_regulator:
> > @@ -202,6 +200,30 @@ static int y030xx067a_unprepare(struct drm_panel
> > *panel)
> >       return 0;
> >  }
> >
> > +static int y030xx067a_enable(struct drm_panel *panel)
> > +{
> > +
> > +     struct y030xx067a *priv = to_y030xx067a(panel);
> > +
> > +     regmap_set_bits(priv->map, 0x06, REG06_XPSAVE);
> > +
> > +     if (panel->backlight) {
> > +             /* Wait for the picture to be ready before enabling backlight */
> > +             msleep(120);
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static int y030xx067a_disable(struct drm_panel *panel)
> > +{
> > +     struct y030xx067a *priv = to_y030xx067a(panel);
> > +
> > +     regmap_clear_bits(priv->map, 0x06, REG06_XPSAVE);
> > +
> > +     return 0;
> > +}
> > +
> >  static int y030xx067a_get_modes(struct drm_panel *panel,
> >                               struct drm_connector *connector)
> >  {
> > @@ -239,6 +261,8 @@ static int y030xx067a_get_modes(struct drm_panel
> > *panel,
> >  static const struct drm_panel_funcs y030xx067a_funcs = {
> >       .prepare        = y030xx067a_prepare,
> >       .unprepare      = y030xx067a_unprepare,
> > +     .enable         = y030xx067a_enable,
> > +     .disable        = y030xx067a_disable,
> >       .get_modes      = y030xx067a_get_modes,
> >  };
> >
> > @@ -246,6 +270,7 @@ static const struct regmap_config
> > y030xx067a_regmap_config = {
> >       .reg_bits = 8,
> >       .val_bits = 8,
> >       .max_register = 0x15,
> > +     .cache_type = REGCACHE_FLAT,
>
> I understand that this is added because the panel registers are
> write-only and read as zero, and it is needed for
> regmap_{clear,set}_bits to work.
>
> This information should definitely be added to the commit message.
>
> If you can add it inline here, and I'll update the commit message when
> applying the patch.
>
> Cheers,
> -Paul
>
> >  };
> >
> >  static int y030xx067a_probe(struct spi_device *spi)
> > diff --git a/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> > b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> > index c558de3f99be..6de7370185cd 100644
> > --- a/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> > +++ b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> > @@ -80,8 +80,6 @@ static const struct reg_sequence
> > ej030na_init_sequence[] = {
> >       { 0x47, 0x08 },
> >       { 0x48, 0x0f },
> >       { 0x49, 0x0f },
> > -
> > -     { 0x2b, 0x01 },
> >  };
> >
> >  static int ej030na_prepare(struct drm_panel *panel)
> > @@ -109,8 +107,6 @@ static int ej030na_prepare(struct drm_panel
> > *panel)
> >               goto err_disable_regulator;
> >       }
> >
> > -     msleep(120);
> > -
> >       return 0;
> >
> >  err_disable_regulator:
> > @@ -128,6 +124,31 @@ static int ej030na_unprepare(struct drm_panel
> > *panel)
> >       return 0;
> >  }
> >
> > +static int ej030na_enable(struct drm_panel *panel)
> > +{
> > +     struct ej030na *priv = to_ej030na(panel);
> > +
> > +     /* standby off */
> > +     regmap_write(priv->map, 0x2b, 0x01);
> > +
> > +     if (panel->backlight) {
> > +             /* Wait for the picture to be ready before enabling backlight */
> > +             msleep(120);
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static int ej030na_disable(struct drm_panel *panel)
> > +{
> > +     struct ej030na *priv = to_ej030na(panel);
> > +
> > +     /* standby on */
> > +     regmap_write(priv->map, 0x2b, 0x00);
> > +
> > +     return 0;
> > +}
> > +
> >  static int ej030na_get_modes(struct drm_panel *panel,
> >                            struct drm_connector *connector)
> >  {
> > @@ -165,6 +186,8 @@ static int ej030na_get_modes(struct drm_panel
> > *panel,
> >  static const struct drm_panel_funcs ej030na_funcs = {
> >       .prepare        = ej030na_prepare,
> >       .unprepare      = ej030na_unprepare,
> > +     .enable         = ej030na_enable,
> > +     .disable        = ej030na_disable,
> >       .get_modes      = ej030na_get_modes,
> >  };
> >
> > --
> > 2.35.1
> >
>
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux