[PATCH v8 3/3] mmc: mediatek: add support for SDIO eint wakup IRQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for eint IRQ when MSDC is used as an SDIO host. This
feature requires SDIO device support async IRQ function. With this
feature, SDIO host can be awakened by SDIO card in suspend state,
without additional pin.

MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC
turn off clock and switch SDIO DAT1 pin to GPIO mode. And during
resume, switch GPIO function back to DAT1 mode then turn on clock.

Some device tree property should be added or modified in MSDC node
to support SDIO eint IRQ. Pinctrls named "state_dat1" and "state_eint"
are mandatory. Since this feature depends on asynchronous interrupts,
"wakeup-source", "keep-power-in-suspend" and "cap-sdio-irq" flags are
necessary, and the interrupts list should be extended:
        &mmcX {
		...
		interrupts-extended = <...>,
                              	      <&pio xxx IRQ_TYPE_LEVEL_LOW>;
                ...
                pinctrl-names = "default", "state_uhs", "state_eint",
                                "state_dat1";
                ...
                pinctrl-2 = <&mmc2_pins_eint>;
                pinctrl-3 = <&mmc2_pins_dat1>;
                ...
                cap-sdio-irq;
		keep-power-in-suspend;
		wakeup-source;
                ...
        };

Co-developed-by: Yong Mao <yong.mao@xxxxxxxxxxxx>
Signed-off-by: Yong Mao <yong.mao@xxxxxxxxxxxx>
Signed-off-by: Axe Yang <axe.yang@xxxxxxxxxxxx>
---
 drivers/mmc/host/mtk-sd.c | 100 +++++++++++++++++++++++++++++++++++---
 1 file changed, 92 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 65037e1d7723..8560d040bacb 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2014-2015 MediaTek Inc.
+ * Copyright (c) 2014-2015, 2022 MediaTek Inc.
  * Author: Chaotian.Jing <chaotian.jing@xxxxxxxxxxxx>
  */
 
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -440,8 +441,12 @@ struct msdc_host {
 	struct pinctrl *pinctrl;
 	struct pinctrl_state *pins_default;
 	struct pinctrl_state *pins_uhs;
+	struct pinctrl_state *pins_eint;
+	struct pinctrl_state *pins_dat1;
 	struct delayed_work req_timeout;
 	int irq;		/* host interrupt */
+	int eint_irq;		/* interrupt from sdio device for waking up system */
+	int sdio_wake_irq_depth;
 	struct reset_control *reset;
 
 	struct clk *src_clk;	/* msdc source clock */
@@ -465,6 +470,7 @@ struct msdc_host {
 	bool hs400_tuning;	/* hs400 mode online tuning */
 	bool internal_cd;	/* Use internal card-detect logic */
 	bool cqhci;		/* support eMMC hw cmdq */
+	bool sdio_eint_ready;	/* Ready to support SDIO eint interrupt */
 	struct msdc_save_para save_para; /* used when gate HCLK */
 	struct msdc_tune_para def_tune_para; /* default tune setting */
 	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
@@ -1527,10 +1533,12 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
 	__msdc_enable_sdio_irq(host, enb);
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	if (enb)
-		pm_runtime_get_noresume(host->dev);
-	else
-		pm_runtime_put_noidle(host->dev);
+	if (mmc->card && !mmc_card_enable_async_irq(mmc->card)) {
+		if (enb)
+			pm_runtime_get_noresume(host->dev);
+		else
+			pm_runtime_put_noidle(host->dev);
+	}
 }
 
 static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
@@ -2631,6 +2639,23 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		goto host_free;
 	}
 
+	/* Support for SDIO eint irq ? */
+	if (mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ) {
+		host->pins_eint = pinctrl_lookup_state(host->pinctrl, "state_eint");
+		if (IS_ERR(host->pins_eint)) {
+			dev_dbg(&pdev->dev, "Cannot find pinctrl eint!\n");
+		} else {
+			host->pins_dat1 = pinctrl_lookup_state(host->pinctrl, "state_dat1");
+			if (IS_ERR(host->pins_dat1)) {
+				ret = dev_err_probe(&pdev->dev, PTR_ERR(host->pins_dat1),
+						    "Cannot find pinctrl dat1!\n");
+				goto host_free;
+			}
+
+			host->sdio_eint_ready = true;
+		}
+	}
+
 	msdc_of_property_parse(pdev, host);
 
 	host->dev = &pdev->dev;
@@ -2722,6 +2747,21 @@ static int msdc_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto release;
 
+	if (host->sdio_eint_ready) {
+		host->eint_irq = irq_of_parse_and_map(host->dev->of_node, 1);
+		ret = host->eint_irq ? dev_pm_set_dedicated_wake_irq(host->dev, host->eint_irq) :
+		      -ENODEV;
+
+		if (ret) {
+			dev_err(host->dev, "Failed to register data1 eint irq!\n");
+			goto release;
+		}
+
+		dev_pm_disable_wake_irq(host->dev);
+		pinctrl_select_state(host->pinctrl, host->pins_dat1);
+	}
+
+	device_init_wakeup(host->dev, true);
 	pm_runtime_set_active(host->dev);
 	pm_runtime_set_autosuspend_delay(host->dev, MTK_MMC_AUTOSUSPEND_DELAY);
 	pm_runtime_use_autosuspend(host->dev);
@@ -2734,6 +2774,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
 	return 0;
 end:
 	pm_runtime_disable(host->dev);
+	dev_pm_clear_wake_irq(host->dev);
 release:
 	platform_set_drvdata(pdev, NULL);
 	msdc_deinit_hw(host);
@@ -2845,6 +2886,16 @@ static int __maybe_unused msdc_runtime_suspend(struct device *dev)
 	struct msdc_host *host = mmc_priv(mmc);
 
 	msdc_save_reg(host);
+
+	if (host->sdio_eint_ready) {
+		disable_irq(host->irq);
+		pinctrl_select_state(host->pinctrl, host->pins_eint);
+		if (host->sdio_wake_irq_depth == 0) {
+			dev_pm_enable_wake_irq(dev);
+			host->sdio_wake_irq_depth++;
+		}
+		sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	}
 	msdc_gate_clock(host);
 	return 0;
 }
@@ -2860,12 +2911,25 @@ static int __maybe_unused msdc_runtime_resume(struct device *dev)
 		return ret;
 
 	msdc_restore_reg(host);
+
+	if (host->sdio_eint_ready) {
+		if (host->sdio_wake_irq_depth > 0) {
+			dev_pm_disable_wake_irq(dev);
+			host->sdio_wake_irq_depth--;
+			sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+		} else {
+			sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
+		}
+		pinctrl_select_state(host->pinctrl, host->pins_dat1);
+		enable_irq(host->irq);
+	}
 	return 0;
 }
 
-static int __maybe_unused msdc_suspend(struct device *dev)
+static int __maybe_unused msdc_suspend_noirq(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct msdc_host *host = mmc_priv(mmc);
 	int ret;
 
 	if (mmc->caps2 & MMC_CAP2_CQE) {
@@ -2874,16 +2938,36 @@ static int __maybe_unused msdc_suspend(struct device *dev)
 			return ret;
 	}
 
+	if (host->sdio_eint_ready)
+		enable_irq_wake(host->eint_irq);
+
 	return pm_runtime_force_suspend(dev);
 }
 
-static int __maybe_unused msdc_resume(struct device *dev)
+static int __maybe_unused msdc_resume_noirq(struct device *dev)
 {
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct msdc_host *host = mmc_priv(mmc);
+
+	if (host->sdio_eint_ready) {
+		disable_irq_wake(host->eint_irq);
+
+		/*
+		 * In noirq resume stage, msdc_runtime_resume()
+		 * won't be called, so disalbe wake irq here
+		 * to block dedicated wake irq handler callback.
+		 */
+		if (likely(host->sdio_wake_irq_depth > 0)) {
+			dev_pm_disable_wake_irq(dev);
+			host->sdio_wake_irq_depth--;
+		}
+	}
+
 	return pm_runtime_force_resume(dev);
 }
 
 static const struct dev_pm_ops msdc_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(msdc_suspend, msdc_resume)
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(msdc_suspend_noirq, msdc_resume_noirq)
 	SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
 };
 
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux