Re: [PATCH v7 5/9] misc: smpro-misc: Add Ampere's Altra SMpro misc driver

[Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>]

On Mon, Mar 21, 2022 at 03:13:51PM +0700, Quan Nguyen wrote:
> This commit adds driver support for accessing various information
> reported by Ampere's SMpro co-processor such as Boot Progress and
> other miscellaneous data.
> 
> Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>

No Documentation/ABI/ entries for your sysfs file?

> +static ssize_t boot_progress_show(struct device *dev, struct device_attribute *da, char *buf)
> +{
> +	struct smpro_misc *misc = dev_get_drvdata(dev);
> +	u32 boot_progress;
> +	u8 current_stage;
> +	u8 boot_status;
> +	u8 boot_stage;
> +	u32 select;
> +	u32 reg_lo;
> +	u32 reg;
> +	int ret;
> +
> +	/* Read current boot stage */
> +	ret = regmap_read(misc->regmap, BOOTSTAGE_CUR_STAGE, &reg);
> +	if (ret)
> +		return ret;
> +
> +	current_stage = reg & 0xff;
> +
> +	/* Read the boot progress */
> +	ret = regmap_read(misc->regmap, BOOTSTAGE_SELECT, &select);
> +	if (ret)
> +		return ret;
> +
> +	boot_stage = (select >> 8) & 0xff;
> +	boot_status = select & 0xff;
> +
> +	if (boot_stage > current_stage)
> +		return -EINVAL;
> +
> +	ret = regmap_read(misc->regmap,	BOOTSTAGE_STATUS_LO, &reg_lo);
> +	if (!ret)
> +		ret = regmap_read(misc->regmap, BOOTSTAGE_STATUS_HI, &reg);
> +	if (ret)
> +		return ret;
> +
> +	boot_progress = swab16(reg) << 16 | swab16(reg_lo);
> +
> +	/* Tell firmware to provide next boot stage next time */
> +	if (boot_stage < current_stage) {
> +		ret = regmap_write(misc->regmap, BOOTSTAGE_SELECT, ((select & 0xff00) | 0x1));
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return snprintf(buf, PAGE_SIZE, "0x%02x 0x%02x 0x%08x\n",
> +			boot_stage, boot_status, boot_progress);

sysfs_emit() please.

Also, this is 3 different things, put all of these in different sysfs
files.

thanks,

greg k-h