On Fri, Mar 18, 2022 at 10:29:03AM +0100, Krzysztof Kozlowski wrote:
> On 17/03/2022 23:58, Linus Walleij wrote:
> > This rewrites the SiRFstar DT bindings in YAML.
> >
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Cc: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> > ---
> > ChangeLog v1->v2:
> > - Change additionalProperties: false to uneavaluatedProperties: false
> > so new common properties get available immediately
> > - This should also make the checker robot happy about
> > lna-supply
> > ---
> > .../devicetree/bindings/gnss/sirfstar.txt | 46 ------------
> > .../devicetree/bindings/gnss/sirfstar.yaml | 71 +++++++++++++++++++
> > 2 files changed, 71 insertions(+), 46 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/gnss/sirfstar.txt
> > create mode 100644 Documentation/devicetree/bindings/gnss/sirfstar.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
> > deleted file mode 100644
> > index f4252b6b660b..000000000000
> > --- a/Documentation/devicetree/bindings/gnss/sirfstar.txt
> > +++ /dev/null
> > @@ -1,46 +0,0 @@
> > -SiRFstar-based GNSS Receiver DT binding
> > -
> > -SiRFstar chipsets are used in GNSS-receiver modules produced by several
> > -vendors and can use UART, SPI or I2C interfaces.
> > -
> > -Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
> > -properties.
> > -
> > -Required properties:
> > -
> > -- compatible : Must be one of
> > -
> > - "fastrax,uc430"
> > - "linx,r4"
> > - "wi2wi,w2sg0004"
> > - "wi2wi,w2sg0008i"
> > - "wi2wi,w2sg0084i"
> > -
> > -- vcc-supply : Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
> > -
> > -Required properties (I2C):
> > -- reg : I2C slave address
> > -
> > -Required properties (SPI):
> > -- reg : SPI chip select address
> > -
> > -Optional properties:
> > -
> > -- sirf,onoff-gpios : GPIO used to power on and off device (pin name: ON_OFF)
> > -- sirf,wakeup-gpios : GPIO used to determine device power state
> > - (pin name: RFPWRUP, WAKEUP)
> > -- timepulse-gpios : Time pulse GPIO (pin name: 1PPS, TM)
> > -
> > -Example:
> > -
> > -serial@1234 {
> > - compatible = "ns16550a";
> > -
> > - gnss {
> > - compatible = "wi2wi,w2sg0084i";
> > -
> > - vcc-supply = <&gnss_reg>;
> > - sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> > - sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
> > - };
> > -};
> > diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
> > new file mode 100644
> > index 000000000000..9f80add3e61b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
> > @@ -0,0 +1,71 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/gnss/sirfstar.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: SiRFstar GNSS Receiver Device Tree Bindings
> > +
> > +allOf:
> > + - $ref: gnss-common.yaml#
>
> The allOf should be just before "properties:" (also in patch #2).
>
> > +
> > +maintainers:
> > + - Johan Hovold <johan@xxxxxxxxxx>
> > +
> > +description:
> > + The SiRFstar GNSS receivers have incarnated over the years in different
> > + chips, starting from the SiRFstarIII which was a chip that was introduced in
> > + 2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired
> > + by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was
> > + acquired by Samsung, while some products remained with CSR. In 2014 CSR
> > + was acquired by Qualcomm who still sell some of the SiRF products.
> > +
> > + SiRF chips can be used over UART, I2C or SPI buses.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - fastrax,uc430
> > + - linx,r4
> > + - wi2wi,w2sg0004
> > + - wi2wi,w2sg0008i
> > + - wi2wi,w2sg0084i
> > +
> > + reg:
> > + description:
> > + The I2C Address, SPI chip select address. Not required on UART buses.
> > +
> > + vcc-supply:
> > + description:
> > + Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
> > +
> > + timepulse-gpios:
> > + description: Comes with pin names such as 1PPS or TM
>
> You don't need this, I think. It's coming from gnss-common.yaml.
I fixed up both and applied.
Rob
