On Tue, 15 Mar 2022 10:30:41 -0700 Gwendal Grignou <gwendal@xxxxxxxxxxxx> wrote: > Allow configure the resistance used during precharge. > > Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx> > --- > .../bindings/iio/proximity/semtech,sx9360.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml > index 63e1a1fd00d4c..a0f8a454481db 100644 > --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml > +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml > @@ -61,6 +61,14 @@ properties: > UINT_MAX (4294967295) represents infinite. Other values > represent 1-1/N. > > + semtech,input-precharge-resistor: > + $ref: /schemas/types.yaml#/definitions/uint32 > + default: 0 > + description: > + Pre-charge input resistance in kOhm. Another one to make in ohms and give it appropriate prefix so we don't need the ref line. Thanks, Jonathan > + minimum: 0 > + maximum: 30 > + > required: > - compatible > - reg > @@ -85,5 +93,6 @@ examples: > semtech,resolution = <256>; > semtech,proxraw-strength = <2>; > semtech,avg-pos-strength = <64>; > + semtech,input-precharge-resistor = <4>; > }; > };
