Re: [PATCH v3 6/6] dt-bindings: pinctrl: convert ocelot-pinctrl to YAML format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/03/2022 21:46, Michael Walle wrote:
> Convert the ocelot-pinctrl device tree binding to the new YAML format.
> 
> Additionally to the original binding documentation, add interrupt
> properties which are optional and already used on several SoCs like
> SparX-5, Luton, Ocelot and LAN966x but were not documented before.
> 
> Also, on the sparx5 and the lan966x SoCs there are two items for the
> reg property.
> 
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
> ---
>  .../bindings/pinctrl/mscc,ocelot-pinctrl.txt  |  42 -------
>  .../bindings/pinctrl/mscc,ocelot-pinctrl.yaml | 108 ++++++++++++++++++
>  2 files changed, 108 insertions(+), 42 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
> deleted file mode 100644
> index 5d84fd299ccf..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -Microsemi Ocelot pin controller Device Tree Bindings
> -----------------------------------------------------
> -
> -Required properties:
> - - compatible		: Should be "mscc,ocelot-pinctrl",
> -			  "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl",
> -			  "mscc,luton-pinctrl", "mscc,serval-pinctrl",
> -			  "microchip,lan966x-pinctrl" or "mscc,servalt-pinctrl"
> - - reg			: Address and length of the register set for the device
> - - gpio-controller	: Indicates this device is a GPIO controller
> - - #gpio-cells		: Must be 2.
> -			  The first cell is the pin number and the
> -			  second cell specifies GPIO flags, as defined in
> -			  <dt-bindings/gpio/gpio.h>.
> - - gpio-ranges		: Range of pins managed by the GPIO controller.
> -
> -
> -The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin
> -configuration documented in pinctrl-bindings.txt.
> -
> -The following generic properties are supported:
> - - function
> - - pins
> -
> -Example:
> -	gpio: pinctrl@71070034 {
> -		compatible = "mscc,ocelot-pinctrl";
> -		reg = <0x71070034 0x28>;
> -		gpio-controller;
> -		#gpio-cells = <2>;
> -		gpio-ranges = <&gpio 0 0 22>;
> -
> -		uart_pins: uart-pins {
> -				pins = "GPIO_6", "GPIO_7";
> -				function = "uart";
> -		};
> -
> -		uart2_pins: uart2-pins {
> -				pins = "GPIO_12", "GPIO_13";
> -				function = "uart2";
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
> new file mode 100644
> index 000000000000..7149a6655623
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microsemi Ocelot pin controller
> +
> +maintainers:
> +  - Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> +  - Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - microchip,lan966x-pinctrl
> +      - microchip,sparx5-pinctrl
> +      - mscc,jaguar2-pinctrl
> +      - mscc,luton-pinctrl
> +      - mscc,ocelot-pinctrl
> +      - mscc,serval-pinctrl
> +      - mscc,servalt-pinctrl
> +
> +  reg:
> +    items:
> +      - description: Base address
> +      - description: Extended pin configuration registers
> +    minItems: 1
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +
> +  gpio-ranges: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2

Thanks for the changes in other files, but I think you did not respond
to my comments here. Can you address them?


Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux