Re: [PATCH v5 2/6] dt-bindings: auxdisplay: Add Titan Micro Electronics TM1628

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-02-25 21:13, Heiner Kallweit wrote:
Add a YAML schema binding for TM1628 auxdisplay
(7/11-segment LED) controller.

This patch is partially based on previous work from
Andreas Färber <afaerber@xxxxxxx>.

Co-developed-by: Andreas Färber <afaerber@xxxxxxx>
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
v5:
- add vendor prefix to driver-specific properties
---
  .../bindings/auxdisplay/titanmec,tm1628.yaml  | 92 +++++++++++++++++++
  1 file changed, 92 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/auxdisplay/titanmec,tm1628.yaml

diff --git a/Documentation/devicetree/bindings/auxdisplay/titanmec,tm1628.yaml b/Documentation/devicetree/bindings/auxdisplay/titanmec,tm1628.yaml
new file mode 100644
index 000000000..2a1ef692c
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/titanmec,tm1628.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/titanmec,tm1628.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Titan Micro Electronics TM1628 LED controller
+
+maintainers:
+  - Andreas Färber <afaerber@xxxxxxx>
+  - Heiner Kallweit <hkallweit1@xxxxxxxxx>
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: titanmec,tm1628
+
+  reg:
+    maxItems: 1
+
+  titanmec,grid:
+    description:
+      Mapping of display digit position to grid number.
+      This implicitly defines the display size.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 7
+
+  titanmec,segment-mapping:
+    description:
+      Mapping of 7 segment display segments A-G to bit numbers 1-12.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 7
+    maxItems: 7
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg

Would it be fair to say that "spi-lsb-first" and "spi-3wire" are also required? The chips aren't configurable so won't exactly be usable any other way. Furthermore I believe the transmission format actually works out equivalent to SPI mode 3, so should warrant "spi-cpha" and "spi-cpol" as well.

+
+patternProperties:
+  "^.*@[1-7],([1-9]|1[0-6])$":
+    type: object
+    $ref: /schemas/leds/common.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for a single LED.
+
+    properties:
+      reg:
+        description: |
+          1-based grid number, followed by 1-based segment bit number.
+        maxItems: 1
+
+    required:
+      - reg

I'm concerned that this leaves us no room to support the additional keypad functionality in future. Having now double-checked a datasheet, the inputs are also a two-dimensional mux (sharing the segment lines), so the device effectively has two distinct but numerically-overlapping child address spaces - one addressed by (grid,segment) and the other by (segment,key).

Rob, Krysztof, any thoughts on the best DT idiom to leave accommodation for that? I'm thinking either require an intermediate node to contain each notional address space, or perhaps add another leading address cell to select between them? I don't believe any of these things have further functionality beyond that.

Thanks,
Robin.

+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@0 {
+            compatible = "titanmec,tm1628";
+            reg = <0>;
+            spi-3-wire;
+            spi-lsb-first;
+            spi-max-frequency = <500000>;
+            titanmec,grid = /bits/ 8 <4 3 2 1>;
+            titanmec,segment-mapping = /bits/ 8 <4 5 6 1 2 3 7>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            alarm@5,4 {
+                reg = <5 4>;
+                function = LED_FUNCTION_ALARM;
+            };
+        };
+    };
+...



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux