Re: [PATCH v3 1/2] dt-bindings: mmc: xenon: add AC5 compatible string

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/03/22 23:13, Ulf Hansson wrote:
> On Tue, 15 Mar 2022 at 23:05, Chris Packham
> <chris.packham@xxxxxxxxxxxxxxxxxxx> wrote:
>> Import binding documentation from the Marvell SDK which adds
>> marvell,ac5-sdhci compatible string and documents the requirements for
>> the for the Xenon SDHCI controller on the 98DX2530.
>>
>> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
>> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
>> ---
>>
>> Notes:
>>      Changes in v3:
>>      - Split from larger series
>>      - Add review from Andrew
>>      Changes in v2:
>>      - New
>>
>>   .../bindings/mmc/marvell,xenon-sdhci.txt      | 52 +++++++++++++++++++
>>   1 file changed, 52 insertions(+)
> Would you mind converting these bindings to the new yaml format, as
> the first step?
>
> Up until this point, I have accepted only very small changes to the
> legacy txt based bindings, but I am starting to think that it's time
> to reject those too. We need all bindings to move to yaml.
>
> Sorry, if this causes additional churns for you.

If it earns me some good karma it'll probably be worth it. Can I put you 
down as the maintainer in the yaml binding?

>
> Kind regards
> Uffe
>
>> diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
>> index c51a62d751dc..43df466f0cb3 100644
>> --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
>> +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
>> @@ -14,6 +14,7 @@ Required Properties:
>>     - "marvell,armada-ap806-sdhci": For controllers on Armada AP806.
>>     - "marvell,armada-ap807-sdhci": For controllers on Armada AP807.
>>     - "marvell,armada-cp110-sdhci": For controllers on Armada CP110.
>> +  - "marvell,ac5-sdhci": For CnM on AC5, AC5X and derived.
>>
>>   - clocks:
>>     Array of clocks required for SDHC.
>> @@ -33,6 +34,13 @@ Required Properties:
>>       in below.
>>       Please also check property marvell,pad-type in below.
>>
>> +  * For "marvell,ac5-sdhci", one or two register areas.
>> +    (reg-names "ctrl" & "decoder").
>> +    The first one is mandatory for the Xenon IP registers.
>> +    The second one is for systems where DMA mapping is required and is the
>> +    related address decoder register (the value to configure is derived from
>> +    the parent "dma-ranges").
>> +
>>     * For other compatible strings, one register area for Xenon IP.
>>
>>   Optional Properties:
>> @@ -171,3 +179,47 @@ Example:
>>
>>                  marvell,pad-type = "sd";
>>          };
>> +
>> +
>> +- For eMMC with compatible "marvell,ac5-sdhci" with one reg range (no dma):
>> +       sdhci0: sdhci@805c0000 {
>> +               compatible = "marvell,ac5-sdhci";
>> +               reg = <0x0 0x805c0000 0x0 0x300>;
>> +               reg-names = "ctrl", "decoder";
>> +               interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
>> +               clocks = <&core_clock>;
>> +               clock-names = "core";
>> +               status = "okay";
>> +               bus-width = <8>;
>> +               /*marvell,xenon-phy-slow-mode;*/
>> +               non-removable;
>> +               mmc-ddr-1_8v;
>> +               mmc-hs200-1_8v;
>> +               mmc-hs400-1_8v;
>> +       };
>> +
>> +- For eMMC with compatible "marvell,ac5-sdhci" with two reg ranges (with dma):
>> +       mmc_dma: mmc-dma-peripherals@80500000 {
>> +               compatible = "simple-bus";
>> +               #address-cells = <0x2>;
>> +               #size-cells = <0x2>;
>> +               ranges;
>> +               dma-ranges = <0x2 0x0 0x2 0x80000000 0x1 0x0>;
>> +               dma-coherent;
>> +
>> +               sdhci0: sdhci@805c0000 {
>> +                       compatible = "marvell,ac5-sdhci", "marvell,armada-ap806-sdhci";
>> +                       reg = <0x0 0x805c0000 0x0 0x300>, <0x0 0x80440230 0x0 0x4>;
>> +                       reg-names = "ctrl", "decoder";
>> +                       interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
>> +                       clocks = <&core_clock>;
>> +                       clock-names = "core";
>> +                       status = "okay";
>> +                       bus-width = <8>;
>> +                       /*marvell,xenon-phy-slow-mode;*/
>> +                       non-removable;
>> +                       mmc-ddr-1_8v;
>> +                       mmc-hs200-1_8v;
>> +                       mmc-hs400-1_8v;
>> +               };
>> +       };
>> --
>> 2.35.1
>>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux